User Manual

Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MONTAGE Reference Manual
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
82
Reference
Sync (Lane Motion Sequencer Sync)
Determines if the playback of the Motion Sequence applied to the Destination (set in the Control Assign
display (page 89)) is synchronized to the Tempo, Beat, or Arpeggio of the Performance.
Settings: Off, Tempo, Beat, Arp, Lane 1 (when Lane 2 – 4 is selected)
Off: Lane Motion Sequencer plays back according to its own clock and is not synchronized to an external clock.
Tempo: Lane Motion Sequencer is synchronized with the Performance tempo.
Beat: Lane Motion Sequencer is synchronized with the beat.
Arp: Lane Motion Sequencer is synchronized with the 1st beat of the measure of the currently playing Arpeggio.
Lane 1: Lane Motion Sequencer is synchronized with the Lane 1.
Speed (Lane Motion Sequencer Speed)
Determines the playback speed of the Motion Sequence.
This is available only when the “Lane Motion Sequencer Sync” is set to “Off.”
Settings: 0 – 127
Unit Multiply (Lane Motion Sequencer Unit Multiply)
Adjusts the Motion Sequencer playback time for the selected Lane.
This is available when the Lane Motion Sequencer Sync parameter is set to something other than “Off” and
“Lane 1.”
Settings: 50% – 6400%, Common, Arp
200%: The playback time will be doubled and the tempo is halved.
100%: The normal playback time.
50%: The playback time will be halved and the tempo doubled.
Common: The value set in the Unit Multiply common to the all Parts will be applied.
Arp: The value set in the Arpeggio Unit Multiply for the selected Part will be applied.
Key On Reset (Lane Motion Sequencer Key On Reset)
Determines whether or not the playback of the Motion Sequence is stopped when you play the keyboard.
This parameter is active when the Lane Motion Sequencer Sync parameter is set to something other than
“Arp” and “Lane 1.”
Also this parameter is not available when “Trigger” is set to “On.”
Settings: Off, Each-On, 1st-On
Each-On: The Sequence resets with each note you play and starts the Sequence from the beginning.
1st-On: The Sequence resets with each note you play and starts the Sequencer from the beginning. If you play a
second note while the first is being held, the Sequence continues cycling according to the same phase as triggered
by the first note—in other words, the Sequence only resets if the first note is released before the second is played.
Loop (Lane Motion Sequencer Loop)
Determines whether the Motion Sequence is played only once or repeatedly.
This is available when the Lane Motion Sequencer Sync parameter is set to something other than “Lane 1.”
Settings: Off, On
Velocity Limit (Lane Motion Sequencer Velocity Limit)
Determines the minimum and maximum Velocity values in which the Motion Sequence responds.
This is available when the Lane Motion Sequencer Sync parameter is set to something other than “Lane 1.”
Settings: 1 – 127
Cycle (Lane Motion Sequencer Cycle)
Selects the desired step length for the Motion Sequence.
Settings: 1 – 16
Load Sequence
Loads Motion Sequence data in the User Memory. For details about Loading, see “Load” (page 174).