User Manual

Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MONTAGE Reference Manual
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
91
Reference
Polarity (Curve Polarity)
Determines the Curve Polarity of the Curve type set in “Curve Type.”
Settings: Uni, Bi
Uni: Unipolar changes only in a positive direction or in a negative direction from a base parameter value according
to the Curve shape.
Bi: Bipolar changes in both of positive and negative directions from a base parameter value.
Ratio (Curve Ratio)
Determines the Curve Ratio.
Settings: -64 – +63
Param 1/Param 2 (Curve Parameter)
Adjusts the Curve shape.
This is not available depending on the Curve Type.
Destination to Name
Copies the Parameter name from “Destination” to “Display Name.” This is available only when “Source” is
set to “AsgnKnob 1 – 8.”
Delete
Deletes the selected “Destination.”
Edit User Curve
Calls up the User Curve Setting display. You can select “Linear” (Curve by Linear Interpolation of eight
coefficients) or “Step.”
Curve No. (Curve Number)
Indicates the selected Curve Number.
Settings: 1 – 32
Curve Name
Names the selected Curve. Touching the parameter calls up the input character display.
Curve Type
Determines the Curve Type.
Settings: Linear, Step
Input
Determines the Input level of the Curve. “Input 1” is fixed to “0.” “Input 8” is fixed to 127 when the Curve
Type is “Linear.”
Settings: 0 – 127