User Manual

Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MONTAGE Reference Manual
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
97
Reference
• Part and Waveform
You can play the Waveform by assigning it to a Part then playing the keyboard with that Part. You can
assign the Waveform to an Element of the Part in the Element Edit for the Normal Part (AWM2) Edit
(page 94) and the Key Edit for the Drum Part Edit (page 126).
Waveform
Indicates the selected Waveform.
Category (Waveform Main Category)
Sub Category (Waveform Sub Category)
Determines the Main category and the Sub category for the selected Waveform.
Settings: See the Data List PDF document.
Name (Waveform Name)
Determines the selected Waveform. Waveform names can contain up to 20 characters. Touching the
parameter calls up the input character display.
Number of Keybank (Number of Key Bank)
Indicates the number of Key Banks in the selected Waveform.
Waveform Total Size
Indicates the total data size of the selected Waveform.
Keybank (Key Bank)
Indicates the selected Key Bank.
Size (Key Bank Size)
Indicates the data size of the selected Key Bank.
Channel (Key Bank Channel)
Indicates the Channel (Stereo or Mono) of the selected Key Bank.
Velocity Limit
Determines the minimum and maximum values of the velocity range within which the selected Key Bank
will respond.
Settings: 1 – 127
Note Limit
Determines the lowest and highest notes of the keyboard range for the selected Key Bank.
Settings: 1 – 127
Number of Key Banks
Waveform Total Size
Note Limit and Velocity Limit for each Key Bank