User Manual

MONTAGE Supplementary Manual

Motion Control

Control Function

Switches among Performance Control, Part Control, and Element/Operator Control.

Settings: Performance Control, Part Control, Elem/Op Control

NOTE You can now store Control function operations as Performance data.

NOTE Element/Operator Control can also be selected by simultaneously holding down the [SHIFT] button and using the [PART CONTROL]

buttons.

 When “Element/Operator Control” is selected

The Number A [1] – [16], Number B [1] – [8], and the Number C [1] – [8] buttons function the same as when “Part Control” is

selected.

When “Element/Operator Control” is selected and the PART [COMMON] button is ON, the Control Sliders 1 – 8 control the levels

of the Elements/Operators of Part 1.

NOTE Element/Operator Control is useful for playing Performances, for example, that contain single Organ Parts, because controlling the

volume of Elements in the Live Set display changes the harmonics of the Organ sound, just as with an actual organ.

Motion Control

Overview

Operation

[PERFORMANCE]  [Motion Control]  [Overview] or [SHIFT] + [PERFORMANCE]

Number buttons PART [MUTE] button and

PART [SOLO] button are OFF

PART [MUTE] button ON PART [SOLO] button ON

Number A [1] – [8] buttons

(upper line)

Part select (1 – 8) Part mute (1 – 8) Part select (1 – 8)

Number A [9] – [16] buttons

(lower line)

Part select (9 – 16) Part mute (9 – 16) Part solo (9 – 16)

Number B [1] – [8] buttons Motion Sequencer for each Part ON/OFF (1 – 8 / 9 – 16)

Number C [1] – [8] buttons Arpeggio for each Part ON/OFF (1 – 8 / 9 – 16)

Control Function