User Manual

MONTAGE Supplementary Manual
43
Utility
Data communication between this instrument and an external device using only the specified MIDI channel is now available.
MIDI I/O Mode
Determines which MIDI I/O mode is used for data communication between this instrument and an external device.
Settings: Multi, Single
Multi: Transmits MIDI data such as Note On/Off messages for each Part.
Single: Transmits MIDI data using only the channel specified in “MIDI I/O Ch.”
MIDI I/O Ch. (MIDI I/O channel)
Determines the MIDI channel to be used for data communication when “MIDI I/O Mode” is set to “Single.”
Settings: Ch1 – 16
NOTE When this parameter is set to “Single,” Arpeggio data is not transmitted to the external device. When the Zone function is active, the
Zone setting for the Performance is given priority over the “MIDI I/O Mode” setting. You can see which setting is active from the MIDI
Signal Flow in the MIDI I/O display.
Settings
Advanced
Operation
[UTILITY]  [Settings]  [Advanced]
MIDI I/O Ch. (MIDI I/O channel)MIDI I/O Mode