User Manual

Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MONTAGE Reference Manual
Drum Part Edit
Common
Part Settings
General
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Control Assign
Receive SW
Key
Osc / Tune
Filter
Level / Pan
Element EQ
129
Reference
From the Level/Pan display you can make Level and Pan settings for each Drum Key.
The full names of the available parameters are shown in the chart below, as they appear in the display.
Settings: Time: 0 – 127, Hold (only for Decay2)
Level: 0 – 127
Level
Determines the output level of the Drum Key. This lets you make detailed balance adjustments among the
various sounds of the Drum Key.
Settings: 0 – 127
Level/Vel (Level Velocity Sensitivity)
Determines how the output level of the Drum Key responds to Velocity.
Settings: -64 – +63
Positive values: The more strongly you play the keyboard, the more the output rises.
Negative values: The more softly you play the keyboard, the more the output rises.
0: The output level does not change.
Pan
Sets the pan position (stereo position) of each Drum Key. This will also be used as the basic Pan position
for the Alternate and Random settings.
Settings: L63 (far left) – C (center) – R63 (far right)
Level/Pan
Operation
[PERFORMANCE]  [EDIT]  Part selection  Key selection  [Level/Pan]
Attack Decay1 Decay2
Time
Attack Time Decay1 Time Decay2 Time
Level
–
Decay1 Level
–
Decay2 Time = HoldDecay2 Time = 0 – 126
Level Level
Attack level Attack level
Decay1 level Decay1 level
Key on Key on
Attach
time
Attach
time
Decay1
time
Decay2
time
Decay1
time
Decay2
time
TimeTime