User Manual

Edit Search Utility Live SetPerformance
MONTAGE Reference Manual
Performance
Home
Motion Control
Overview
Quick Edit
Arpeggio
Motion Seq
Super Knob
Knob Auto
Mixing
Scene
Play / Rec
MIDI
Audio
38
Reference
From the Motion Sequencer display you can set parameters related to Motion Sequencer for multiple Parts.
MS Master (Motion Sequencer Master Switch)
Determines whether the Motion Sequencer is on or off for the entire Performance. This setting is applied to
the [MOTION SEQ ON/OFF] button on the panel.
Settings: Off, On
Active (Active Motion Sequencer)
Indicates the number of the active Lane. The number after slash indicates the maximum number of the
Lanes which can be activated simultaneously.
PartSW (Motion Sequencer Part Switch)
Determines whether the Motion Sequencer is on or off for each Part/all Parts. This setting is applied to the
corresponding Number B [1] – [8] button on the panel in the Part Control status. Also you can turn the
Motion Sequencer for Common/AD Part on or off by operating the ELEMENT/OPERATOR [COMMON]
button on the panel. Please note that you cannot use the panel buttons when all Lane switches for the Part
are set to off.
Settings: Off, On
Lane Switch
Determines whether each Lane is on or off. You can set up to four Lanes corresponding to the Motion
Sequencer function for one Part. Up to eight Lanes can be used at the same time for the entire
Performance.
Settings: Off, On
Motion Seq Select (Motion Sequence Select)
Determines the Motion Sequence Type. This setting is applied to the Number B [1] – [8] buttons on the
panel in the Performance Control status.
Settings: 1 – 8
Motion Seq (Motion Sequencer)
Operation
[PERFORMANCE]  [Motion Control]  [Motion Seq]