User Manual

Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MONTAGE Reference Manual
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
67
Reference
From the Routing display you can determine the Effect connections for Parts.
Element 1 – 8 (Element Connection Switch)
Determines which Insertion Effect (A or B) is used to process each individual Element. The “Thru” setting
lets you bypass the Insertion Effects for the specified element.
Settings: Thru, InsA (Insertion Effect A), InsB (Insertion Effect B)
Insertion FX Switch (Insertion Effect Switch)
Determines whether the Insertion Effect A/B is active or not.
Settings: Off, On
Category (Effect Category)
Type (Effect Type)
Determines the category and type for the selected Effect.
Settings: For details on the editable Effect categories and types, see the Data List PDF document. Also, for details on the
description for each Effect type, see the Synthesizer Parameter Manual PDF document.
Preset
Allows you to call up pre-programmed settings for each Effect type, designed to be used for specific
applications and situations. You can change how the sound is affected by the selected pre-programmed
settings.
Settings: For a list of all Preset Effects, see the Data List PDF document.
Side Chain/Modulator (Side Chain/Modulator Part)
The Side Chain/Modulator uses the output from one track to control an effect in a different track. You can
specify the Effect type for activating the feature so that input signals for Parts other than the selected Part
or the audio input signal can control the specified Effect. This may not be active depending on the
particular Effect Type.
Here you can determine the Part used for the Side Chain/Modulator.
This is not available when you select the same Part or “Master” as the Modulator Part.
Settings: Part 1 – 16, A/D, Master, Off
Effect
Routing
Operation
[PERFORMANCE]  [EDIT]  Part selection  ELEMENT/OPERATOR [COMMON]  [Effect]
[Routing]
Insertion FX Switch
Insertion FX Switch