User Manual

Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MONTAGE Reference Manual
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
71
Reference
 When “3-band EQ” is selected
From this display you can make 3-band EQ settings.
EQ Low Gain (3-band EQ Low Gain)
Determines the level gain of the Low band.
Settings: -12dB – +12dB
EQ Mid Gain (3-band EQ Middle Gain)
Determines the level gain of the Mid band.
Settings: -12dB – +12dB
EQ Hi Gain (3-band EQ High Gain)
Determines the level gain of the High band.
Settings: -12dB – +12dB
EQ Low Freq (3-band EQ Low Frequency)
Determines the frequency for the Low band.
Settings: 50.1Hz – 2.00kHz
EQ Mid Freq (3-band EQ Middle Frequency)
Determines the frequency for the Mid band.
Settings: 139.7Hz – 10.1kHz
EQ Hi Freq (3-band EQ High Frequency)
Determines the frequency for the High band.
Settings: 503.8Hz – 14.0kHz
EQ Mid Q (3-band EQ Middle Q)
Determines the EQ bandwidth of the Mid band.
Settings: 0.7 – 10.3