User Manual

Edit Search Utility Live SetPerformance
Normal Part (AWM2) Drum Part Normal Part (FM-X) Common/Audio
MONTAGE Reference Manual
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
92
Reference
Output
Determines the Output level of the Curve.
Settings: 0 – 127
From the Receive Switch display you can set how each individual Part responds to various MIDI data, such
as Control Change and Program Change messages. When the relevant parameter is set to “ON,” the
corresponding Part responds to the appropriate MIDI data.
NOTE If CC (Receive Control Change) here is set to “OFF,” parameters related to Control Change are not available.
Pgm Change (Receive Program Change)
Determines whether Program Change messages are received or not.
Settings: Off, On
Bank Select (Receive Bank Select)
Determines whether Bank Select MSB/LSB messages are received or not.
This is not available when the Receive Control Change is set to Off.
Settings: Off, On
Pitch Bend (Receive Pitch Bend)
Determines whether MIDI messages generated by using the Pitch Bend Wheel are received or not.
Settings: Off, On
After Touch (Receive After Touch)
Determines whether After Touch messages are received or not.
Settings: Off, On
CC (Receive Control Change)
Determines whether Control Change messages are received or not.
Settings: Off, On
Vol/Exp (Receive Volume/Expression)
Determines whether volume messages are received or not.
This is not available when the Receive Control Change is set to Off.
Settings: Off, On
Receive SW (Receive Switch)
Operation
[PERFORMANCE]  [EDIT]  Part selection  ELEMENT/OPERATOR [COMMON] 
[Mod/Control]  [Receive SW]