User Manual

ManualsBrandsYamaha ManualsPortable GeneratorMOTIF-RACK XS

Faders & XY Pad Owner’s Manual 1

Faders & XY Pad Owner’s Manual

• Copying of the commercially available music sequence data and/or digital audio files is strictly prohibited except for your personal use.

• The software and this owner’s manual are exclusive copyrights of Yamaha Corporation.

• Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written consent of the manufacturer.

• Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for the results of the use of this manual and the

software.

• The screen displays as illustrated in this Owner’s Manual are for instructional purposes, and may appear somewhat different from the screens which appear on your devicer.

• Apple, iPad are trademarks of Apple Inc., registered in the U.S. and other countries.

• The company names and product names in this Owner’s Manual are the trademarks or registered trademarks of their respective companies.

This Mixer-like application lets you control the Tone Generator Parts of the MIDI instrument from your iPad.

What is Faders & XY Pad?

Faders & XY Pad

iPad

iMX-1

MIDI OUT MIDI IN

MIDI IN MIDI OUT

Makes the overall

settings.

One of the Fader

Control displays.

Select the desired

template then start

operating the faders.

One of the Mixer Control

displays. This lets you

control the specified faders

simultaneously by dragging

the XY Pad area.

XY Pad display

Parameter assign

window

Utility window

Faders display

Fader operation transmits the MIDI

Control Change messages to the MIDI

instrument.

Assigns a MIDI Control

Change function to the

corresponding Fader.

NOTE

For information about the MIDI settings of the

instrument, refer to the Owner’s Manual

which came with the instrument.

MIDI instrument

By using MIDI cables and a Yamaha i-MX1, connect the instrument to an iPad.

The MOTIF XF can be connected via wireless Network MIDI. For details about

wireless MIDI connectivity, refer to the “New Functions in MOTIF XF Version 1.20”

Manual.

Summary of content (5 pages)

PAGE 1
Faders & XY Pad Owner’s Manual • Copying of the commercially available music sequence data and/or digital audio files is strictly prohibited except for your personal use. • The software and this owner’s manual are exclusive copyrights of Yamaha Corporation. • Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written consent of the manufacturer.
PAGE 2
Title bar and Utility window This page covers the section common to the Faders display and the XY Pad display. Each lamp flashes according to the MIDI in/out messages. Title bar Tapping this opens or closes the Utility window. Utility window When Individual Select is set to ON, you can select the preset skin individually for Panel, Bottom, Fader, and Scale in the Faders display. When Individual Select is set to OFF, only the Panel is available and you can select the whole skin of the Faders display.
PAGE 3
Faders display One of the Fader Control displays. Select the template at the left top corner then start operating the faders. Tapping this changes the screen to the XY Pad display, the other Fader Control display. Template Name According to the settings of the Template shown here, operating the Faders transmits the MIDI Control Change messages. Tapping [+]/[-] changes the Template in single steps.
PAGE 4
Parameter Assign window This window lets you assign the MIDI Control Change parameter to the corresponding Fader. Only one parameter can be assigned on this window. In addition, you can set the Maximum and Minimum values of the parameter by inputting the desired MIDI value from the destination instrument. Parameter Assign window Returns the settings to the original before being edited. Tapping this button will cancel the settings and close the window. Finalizes the settings then closes the window.
PAGE 5
XY Pad display One of the Mixer Control displays. This lets you control the specified faders simultaneously by dragging on the XY Pad area. Sets the sensitivity of the red ball in the XY Pad area. Move the slider rightward to raise the sensitivity. Upper Outlet Tapping this will change the screen to the Faders display. XY Pad Shows the current operated position on the Pad.