User Manual

Effect Parameter List
MOTIF-RACK XS Data List
36
[4] TEMPO DELAY STEREO
[5] CONTROL DELAY
[6] DELAY L, R
[7] DELAY L, C, R
[8] DELAY L, R (STEREO)
Category - CHORUS
[1] G CHORUS
[2] 2 MODULATOR
[3] SPX CHORUS
No. Parameter Range Value Table No.
1 Delay Time 32nd/3 – 4thx6 (0 – 19) 14
2 Feedback Level -63 – +63 (1 – 127)
3 Feedback High Dump 0.1 – 1.0 (1 – 10)
4 L/R Diffusion -63ms – +63ms (1 – 127)
5 Lag -63ms – +63ms (1 – 127)
6—
7—
8—
9—
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 —
12 —
13 – 16: Same as the parameters shaded in gray in CROSS DELAY on page 35.
No. Parameter Range Value Table No.
1 Delay Time 0.1ms – 1486.0ms (1 – 14860)
2 Delay transition rate 1 – 48 (1 – 48)
3 Feedback Level -63 – +63 (1 – 127)
4 Feedback High Damp 0.1 – 1.0 (1 – 10)
5—
6 – 9: Same as the parameters shaded in gray in CROSS DELAY on page 35.
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 Control Type normal, scratch (0 – 1)
12 —
13 —
14 —
15 —
16 —
No. Parameter Range Value Table No.
1 Delay Time L 0.1ms – 1638.3ms (1 – 16383)
2 Delay Time R 0.1ms – 1638.3ms (1 – 16383)
3 Feedback Time 1 0.1ms – 1638.3ms (1 – 16383)
4 Feedback Time 2 0.1ms – 1638.3ms (1 – 16383)
5 Feedback Level -63 – +63 (1 – 127)
6 Feedback High Damp 0.1 – 1.0 (1 – 10)
7—
8—
9—
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 —
12 —
13 – 16: Same as the parameters shaded in gray in CROSS DELAY on page 35.
No. Parameter Range Value Table No.
1 Delay Time L 0.1ms_1638.3ms (1 – 16383)
2 Delay Time R 0.1ms_1638.3ms (1 – 16383)
3 Delay Time C 0.1ms_1638.3ms (1 – 16383)
4 Feedback Time 0.1ms_1638.3ms (1 – 16383)
5 Feedback Level -63_+63 (1 – 127)
6 Delay Level C 0_127 (0 – 127)
7 Feedback High Damp 0.1_1.0 (1 – 10)
8—
9—
10 Dry/Wet Balance D63>W _ D=W _ D<W63 (1 – 127)
11 —
12 —
13 – 16: Same as the parameters shaded in gray in CROSS DELAY on page 35.
No. Parameter Range Value Table No.
1 Delay Time L 0.1ms – 1638.3ms (1 – 16383)
2 Delay Time R 0.1ms – 1638.3ms (1 – 16383)
3 Feedback Time L 0.1ms – 1638.3ms (1 – 16383)
4 Feedback Time R 0.1ms – 1638.3ms (1 – 16383)
5 Feedback Level -63 – +63 (1 – 127)
6 Feedback High Damp 0.1 – 1.0 (1 – 10)
7—
8—
9—
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 —
15 —
13 – 16: Same as the parameters shaded in gray in CROSS DELAY on page 35.
No. Parameter Range Value Table No.
1 LFO Speed 0.0Hz – 39.70Hz (0 – 127) 1
2—
3 PM Depth 0 – 127 (0 – 127)
4 Feedback Level -63 – +63 (1 – 127)
5 Delay Offset 0.0ms – 50.0ms (0 – 127) 2
6 – 9: Same as the parameters shaded in gray in CROSS DELAY on page 35.
10 Dry / Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 EQ Mid Frequency 100Hz – 10.0kHz (14 – 54) 3
12 EQ Mid Gain -12dB – +12dB (52 – 76)
13 EQ Mid Width 0.1 – 12.0 (1 – 120)
14 —
15 Input Mode mono, stereo (0 – 1)
16 —
No. Parameter Range Value Table No.
1 LFO Speed 0.0Hz – 39.70Hz (0 – 127) 1
2 AM Depth 0 – 127 (0 – 127)
3 PM Depth 0 – 127 (0 – 127)
4 Feedback Level -63 – +63 (1 – 127)
5 Delay Offset 0.0ms – 50.0ms (0 – 127) 2
6 – 9: Same as the parameters shaded in gray in CROSS DELAY on page 35.
10 Dry / Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 EQ Mid Frequency 100Hz – 10.0kHz (14 – 54) 3
12 EQ Mid Gain -12dB – +12dB (52 – 76)
13 EQ Mid Width 0.1 – 12.0 (1 – 120)
14 —
15 Input Mode mono, stereo (0 – 1)
16 —
No. Parameter Range Value Table No.
1 LFO Speed 0.0Hz – 39.70Hz (0 – 127) 1
2 LFO Depth 0 – 127 (0 – 127)
3 Feedback Level -63 – +63 (1 – 127)
4 Delay Offset 0.0ms – 50.0ms (0 – 127) 2
5—
6 – 9: Same as the parameters shaded in gray in CROSS DELAY on page 35.
10 Dry/Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 EQ Mid Frequency 100Hz – 10.0kHz (14 – 54) 3
12 EQ Mid Gain -12dB – +12dB (52 – 76)
13 EQ Mid Width 0.1 – 12.0 (1 – 120)
14 —
15 Input Mode mono, stereo (0 – 1)
16 —