User Manual

ManualsBrandsYamaha ManualsSynthesizersMOTIF XF Series

181

182

183

184

185

186

187

188

189

190

Pattern Jobs

MOTIF XF Reference Manual

187

Voice mode

Song mode

Pattern mode

Mixing mode

Master mode

Utility mode

File mode

Performance

mode

Sampling

mode 1

Sampling

mode 2

Reference

3 Keep Original Phrase

When this box is checkmarked, the original destination

Pattern data is retained in memory, along with the new

appended Pattern data. When the Keep Original Phrase

checkbox is checked, this Job requires twice the number

of empty user Phrases as the number of tracks containing

data in which to store the appended Phrase data. If the

required space is not available, an alert message will

appear and the Job will be aborted. If this occurs use the

Clear Phrase Job to delete unused Phrases then try again.

If the box is not checkmarked, the original destination

Pattern is erased and replaced with the newly created

Phrases.

n If this Job is applied to Patterns which use Sample Voices, the

Sample Voices of the source Phrase (1) will not be appended.

n If the Pattern length becomes greater than 256 measures as a

result of this Job, an error message will be displayed and the

Job will be aborted.

This Job splits a selected Pattern (1) into two separate

Patterns (1 and 2). The Pattern 1 is divided at the Split

Point (3). Actually, the Phrases making up the source

Pattern (1) will be divided and the divided Phrases after

the Split Point will be assigned to the tracks of the

destination Pattern.

1 Original Pattern

Determines the original Pattern to be split by selecting the

Pattern number (01 – 64) and Section (A – P). Executing

the Job leaves the part before the Split Point in the original

Phrase.

2 Destination Pattern

Determines the split destination Pattern by selecting the

Pattern number (01 – 64) and Section (off, A – P).

Executing the Job moves the part after the Split Point to this

split destination Pattern. When either of the Pattern number

or Section is set to “off,” the part after the Split Point (3) of

the original pattern (1) will be deleted.

NOTICE

This Job overwrites any data already existing in the split

destination Pattern (2).

3 Splitpoint Measure

Specifies the measure at which the Pattern will be split.

Settings: 002 – 256

4 Keep Original Phrase

When this box is checkmarked, the Phrase of the original

Pattern is retained in memory and the results of the Split

Job are written to empty Phrases. When the Keep Original

Phrase checkbox is checked, this Job requires twice the

number of empty user Phrases as the number of tracks

containing data in which to store the appended Phrase

data. If the required space is not available, an alert

message will appear and the Job will be aborted. If this

occurs, use the Clear Phrase Job to delete unused Phrases

and try again.

When this box is not checkmarked, the Phrases making up

the original Pattern are erased and replaced with the newly

created Phrases.

5 Copy Sample Voice

When this box is checkmarked, Sample Voices (if included

in the original Pattern) are copied to the destination Pattern.

This Job clears specified Pattern. You can also clear only

the specified Section of the selected Pattern.

1 Pattern (Pattern and Section) to be cleared

Determines the Pattern to be cleared. When the Pattern is

set to “all,” all the Pattern data will be cleared. When the

Section is set to “all,” all data from the selected Pattern will

be cleared.

2 Clear Pattern Chain

When the checkbox is checked, the Pattern Chain data will

also be cleared. When the checkbox is not checked, the

Pattern Chain data will not be cleared.

n The Waveform on SDRAM cannot be deleted via this Job even

if the Sample Voice is used in the specified Section. If you

want to actually delete the Waveform assigned to the Sample

Voice used in the specified Section, use the Delete Job

(page 135) in the Sampling Job mode.

03: Split Pattern

04: Clear Pattern