User Manual

MOTIF XF Reference Manual
Multi-timbral Tone Generator Settings for Song/Pattern Playback (Mixing mode)
195
Voice mode
Song mode
Pattern mode
Mixing mode
Master mode
Utility mode
File mode
Performance
mode
Sampling
mode 1
Sampling
mode 2
Reference
You can apply 3-band parametric EQ to each Part to adjust
the sound.
The function is the same as the one in the EQ display
(page 116) in the Performance Part Edit mode.
From this display you can set how each individual Part
responds to various MIDI data, such as Control Change
and Program Change messages. When the relevant
parameter is set to “on,” the corresponding Part responds
to the appropriate MIDI data.
The function is the same as the one in the Receive Switch
display (page 116) in the Performance Part Edit mode. In
addition to the parameters which can be set in the
Performance Part Edit mode, the Program Change and
Bank Select can be set in this display of the Mixing mode.
Mixing Job—Convenient functions
The Mixing Job mode features some convenient data organization and initialization tools, for use when creating
Performances and archiving them. To enter the Mixing Job mode, press the [JOB] button in the Mixing mode. Press the
[EXIT] button to return to the Mixing Play mode.
1 In the Mixing mode or Mixing Edit mode, press
the [JOB] button to enter the Mixing Job mode.
2 Call up the desired Mixing Job menu by
pressing the appropriate button ([F1] – [F6]).
3 Set the parameters for executing the Job.
4 Press the [ENTER] button. (The display
prompts you for confirmation.)
To cancel the Job, press the [DEC/NO] button.
5 Press the [INC/YES] button to execute the Job.
After the Job has been completed, a “Completed”
message appears and operation returns to the original
display.
6 Press the [MIXING] button to return to the
Mixing Play mode.
NOTICE
Even if you execute the Job, selecting a different Song/Pattern
or turning the power off without storing will erase the Mixing
data. Make sure to store the Song/Pattern data (including the
Mixing) to internal memory by pressing the [STORE] button
before selecting a different Song/Pattern or turning the power
off.
This function lets you reset (initialize) all Mixing parameters
to their default settings. It also allows you to selectively
initialize certain parameters, such as Common settings,
settings for each Part, and so on.
1 All Parameters
All settings for the selected Mixing are initialized. When this
is set to on, the Common parameters (2) and Part
parameters (3) cannot be set.
2 Common Parameters
Common parameter settings for the selected Mixing are
initialized.
n The Insertion Effect Switch is a Part parameter. Therefore,
checkmark the desired boxes of Parts 1 – 16 (described
below) if you wish to initialize the Insertion Effect Switch
parameter settings.
Equalizer (EQ) Settings—[F5] EQ
(Equalizer)
MIDI Receive Settings—[F6] RcvSwitch
(Receive Switch)
Mixing Job Procedure Initializing the Mixing—[F1] Init
1
2
3
4