User Manual

ManualsBrandsYamaha ManualsSynthesizersMOTIF XF Series

211

212

213

214

215

216

217

218

219

220

Voice mode Song mode Pattern mode Mixing mode Master mode Utility mode File mode

Performance

mode

Sampling

mode 1

Sampling

mode 2

Reference

Using as a Master Keyboard (Master mode)

MOTIF XF Reference Manual

214

Common Edit parameters

[MASTER]  [EDIT]  [COMMON EDIT]

Common Edit lets you edit the parameters common to all

Zones of the selected Master.

From this display, you can assign the name to the entire

Master program (at the top of this display) and all the

Zones (1 – 8 listed on this display) used in building up the

Master. For detailed instructions on naming, refer to “Basic

Operation” on page 37.

From this display you can set basic parameters for the

Master, including the mode that is called up with the Master

and the program number.

1 Mode

Determines the mode that is called up when the Master

number is selected.

Settings: voice, performance, pattern, song

2 Memory

Determines the Program number that is called up when the

Master is selected. The name of the selected Voice/

Performance/Song/Pattern is shown.

Settings: Differs depending on the Mode setting above.

When the Mode is set to Voice:

Voice Bank: PRE1 – 8, USR1 – 3, GM, GMDR, PDR, UDR

Voice Number: 001 (A01) – 128 (H16)

When the Mode is set to Performance:

Performance Bank: USR1 – 3

Performance Number: 001 (A01) – 128 (H16)

When the Mode is set to Pattern:

Pattern Number: 01 – 64

When the Mode is set to Song:

Song number: 01 – 64

3 Zone Switch

Determines whether or not the keyboard will be divided into

(up to) eight independent areas (called “Zones”). For

details about Zones, see page 212.

Settings: on, off

4 Knob Ctrl Assign (Knob Control Assign)

From this display you can set which row of Knob functions

will be lit and selected. When set to “zone,” selecting the

Master lights no lamp and automatically calls up the Knob/

Slider functions specifically set for each respective Zone

(page 217).

Settings: Differs depending on the Mode setting above. Note that

“zone” can be selected only when the Zone Switch (3) is

set to “on.”

When the Mode is set to Voice:

tone 1, tone 2, ARP FX, zone

When the Mode is set to Performance, Pattern or Song:

tone 1, tone 2, ARP FX, reverb, chorus, pan, zone

5 [F6] Get Name

Pressing the [F6] button assigns the name of the currently

selected Voice/Performance/Song/Pattern to the Master

name.

6 [SF6] INFO (Information)

Press this button to call up the information window of the

current Master.

Master Information—[SF6] INFO

(Information)

This window indicates the information of the current Master.

Settings cannot be changed here.

1 Master Name

Indicates the name of the current Master.

2 Mode

Indicates the mode memorized to the current Master. One

of the modes (Voice, Performance, Pattern or Song) is

indicated here.

Naming the edited Master—[F1] Name

Other Parameter Settings—[F2] Other