User Manual

MOTIF XF Owner’s Manual
43
Creating an original Pattern
6 Set the following parameters as required in the
Arpeggio Record display.
6-1 Set the Switch parameter to on.
6-2 Set the Voice with Arpeggio (ARP) parameter to on. When
this is set to “on,” a Voice matching the selected Arpeggio
type is automatically called up each time the Arpeggio
type is changed.
6-3 Select the Arpeggio type by specifying the Category, Sub
Category and Type.
7 After completing setup, press a note on the
keyboard to start recording.
Recording will stop automatically when the last measure
(specified by the Length) is reached.
8 Press the [STORE] button to store the Pattern.
Storing the created Pattern
After recording, make sure to store the created Pattern to
internal memory by pressing the [STORE] button to call up
the Pattern Store window.
The operation is basically the same as in the Voice Play
mode.
NOTICE
When you execute the Store operation, the settings for the
destination memory will be overwritten. Important data should always
be backed up to a separate storage device.
Creating a Pattern Chain for
converting to a Song
In these instructions you’ll learn how to assign each of the
created Pattern Phrases to the Section, arrange the Sections
in your favorite order to create the Pattern Chain, and
convert the Pattern Chain to a Song. This converted Song
data can be used as backing accompaniment for Melody
recording.
Creating a Pattern Chain
This section explains how to create a Pattern Chain by
arranging the Sections in order as shown in the example
below.
1 In the Pattern Play mode, select the desired
Pattern.
2 Press the [F5] Chain button.
3 If necessary, move the cursor to the Tempo value
then set the desired value.
4 Press the [EDIT] button to enter the Pattern Chain
Edit mode.
Section A
(Intro)
1st measure
Section B
(Melody A )
5th measure
Section C
(Main theme)
9th measure
Section D
(Ending)
13th measure
Te mpo