User Manual

MOTIF XF Owner’s Manual
66
Display Messages
LCD Indication Description
Are you sure? Confirms whether you want to execute a specified operation or not.
Arpeggio memory full. The internal memory for Arpeggio data is full, preventing storing the recorded sequence data as an Arpeggio.
Bad disk or memory. The external storage device connected to this synthesizer is unusable. Format the external storage device and
try again.
Bulk data protected. Bulk data cannot be received because of the setting in the Utility mode.
Can’t access to the host The MOTIF XF cannot access a host computer.
Can’t execute to the Preset Wave. This message appears when you try to save the preset Waveform to an external storage device.
Can’t undo.
Are you sure?
When certain Song/Pattern Jobs are executed, internal memory becomes too full for use of the Undo operation.
Completed. The specified load, save, format, or other Job has been completed.
Confirmed password is invalid. The new password cannot be registered because the confirmed password does not match the new password.
Connecting to USB device... Currently recognizing the USB storage device connected to the USB TO DEVICE terminal.
Copy protected. You have attempted to export or save a copy-protected digital audio source.
Device number is off. Bulk data cannot be transmitted/received since the device number is off.
Device number mismatch. Bulk data cannot be transmitted/received since the device numbers don’t match.
Directory is not empty. You have attempted to delete a folder that contains data.
Disk or memory is full. The external storage device is full and no more data can be saved. Use a new external storage device, or make
space by erasing unwanted data from the storage device.
Disk or memory is write-protected. The external storage device is write protected, or you have attempted to write to a read-only medium such as
CD-ROM.
Disk or memory read/write error. An error occurred while reading or writing to/from an external storage device.
File already exists. A file having the same name as the one you are about to save already exists.
File is not found. The specified file was not found on the external storage device during a load operation.
File or directory path is too long. The file or directory you tried to access cannot be accessed because the amount of characters indicating the
path is too long.
FW identity ID check OK. The MOTIF XF has been properly connected to the computer via an IEEE1394 cable.
Illegal bulk data. An error occurred while receiving the Bulk data or Bulk Request message.
Illegal file name. The specified file name is invalid. Try entering a different name.
Illegal file. The file specified for loading is unusable by this synthesizer or cannot be loaded in the current mode.
Illegal parameters. This message appears when trying to execute the Song Job or Pattern Job with invalid settings.
Illegal sample data. The Sample file specified for loading is unusable by this synthesizer.
Keybank full The maximum overall number of Key Banks has been exceeded when executing Sampling related operations
including Jobs and Load.
MIDI buffer full. Failed to process the MIDI data because too much data was received at one time.
MIDI checksum error. An error occurred when receiving bulk data.
Mixing Voice full. The Mixing Voice cannot be stored because the number of Voices already stored has exceeded the maximum
capacity.
New Flash Memory Module.
Please load waveform data.
This message appears when the Flash Memory Expansion Module (FL512M/FL1024M) which was installed in a
different MOTIF XF has been installed to the current MOTIF XF. If this message appears, you should save the
Waveform data (including the parameter settings) of the previous MOTIF XF to a USB storage device, connect
the USB storage device to the current MOTIF XF, then load the Waveform data. This occurs because the
Sample without the parameter settings cannot produce the proper sound.
No data. When a Song/Pattern Job is executed, the selected track or range contains no data. Select an appropriate track
or range. In addition, this message appears when a Job related to a Mixing Voice cannot be executed because
the specified Mixing Voice is not available.
No Flash Memory Module installed or
module is unformatted.
This message appears when no Flash Memory Expansion Module is installed or the unformatted Module has
been installed.
No sample data. This message appears when a Sample-related Job cannot be executed because the specified Sample is not
available. This message appears also when you try loading the Waveform data via the “FL1/FL2 without
sample” setting even though the corresponding Sample is not available on the Flash Memory Expansion
Module.
Now collecting the information of the
network...
This message appears while obtaining the network information.
Now executing Factory set... Indicates this synthesizer is restoring the factory-programmed settings.
Now Installing data to Flash Memory
Module
The Sample data is being copied to the Flash Memory Expansion Module.
Now loading... Indicates that a file is being loaded.
Now receiving MIDI bulk data... Indicates this synthesizer is receiving MIDI bulk data.