User Manual

Faders & XY Pad Owner’s Manual 4
This window lets you assign the MIDI Control Change parameter to the corresponding Fader. Only one parameter can be assigned on this window. In
addition, you can set the Maximum and Minimum values of the parameter by inputting the desired MIDI value from the destination instrument.
Parameter Assign window
Parameter Assign window
Tapping this button will cancel the settings
and close the window.
To assign the MIDI Control Change:
Tap [Learn] so that it flashes, then input
the MIDI Control Change message from
the instrument. Tap [Learn] again to stop
flashing.
To set the Minimum Value of the Fader:
Tap [Learn] so that it flashes, then input
the MIDI Control Change message from
the instrument. Tap [Learn] again to stop
flashing.
Returns the settings to the original before
being edited.
Finalizes the settings then closes the
window.
Tapping here assigns the MIDI Control
Change number.
The button color is changed from the
original one while the corresponding
Parameter Assign window is being opened.
To set the Maximum Value of the Fader:
Tap [Learn] so that it flashes, then input the
MIDI Control Change message from the
instrument. Tap [Learn] again to stop
flashing.
Tapping here assigns the MIDI Transmit
Channel.