User Manual

MOTIF XF Reference Manual
117
Voice mode
Song mode
Pattern mode
Mixing mode
Master mode
Utility mode
File mode
Performance
mode
Sampling
mode 1
Sampling
mode 2
Reference
Performance Job—Convenient Functions
The Performance Job mode features some convenient data organization and initialization tools, for use when creating
Performances and archiving them. Press the [JOB] button in the Performance mode to enter the Performance Job mode.
Performance Job—Basic Operation
1
In the Performance mode, press the [JOB]
button to enter Performance Job Mode.
2 Select the desired Job menu by pressing the
appropriate button, [F1] – [F4].
3 Move the cursor to the desired parameter, then
set the value.
4 Press the [ENTER] button. (The display
prompts you for confirmation.)
To cancel the Job, press the [DEC/NO] button.
5 Press the [INC/YES] button to execute the Job.
After the Job has been completed, a “Completed”
message appears and operation returns to the original
display.
6 Press the [PERFORM] button to return to the
Performance Play mode.
NOTICE
Even if you execute the Job, selecting a different Performance
or turning the power off without storing will erase the
Performance data. Make sure to store the Performance data to
internal memory by pressing the [STORE] button before
selecting a different Performance or turning the power off.
Initializing the Performance—[F1]
Init (Initialize)
This function lets you reset (initialize) all Performance
parameters to their default settings. It also allows you to
selectively initialize certain parameters, such as Common
settings, settings for each Part, and so on.
1 All Parameters
All settings for the selected Performance are initialized.
When this is set to on, the cursor cannot be moved.
2 Common Parameters
Common parameter settings for the selected Performance
are initialized.
n The Insertion Effect Switch is a Part parameter. Therefore,
checkmark the box of Part 1 – 4 described below if you wish to
initialize the Insertion Effect Switch parameter settings.
3 Part Parameters
Part 1 – 4
Parameter settings for Parts which are turned on are initialized.
A/D (A/D Input)
This is the Part input from the external audio equipment
connected to the A/D INPUT jack. When this is checkmarked,
parameter settings for the A/D Input Part (page 106) of
Common Edit are initialized.
FW
This is the Part input from the external equipment connected to
the IEEE1394 jack via the IEEE1394 cable. When this is
checkmarked, parameter settings for the FW Part (page 106)
of the Common Edit are initialized.
Edit Recall—[F2] Recall
If you are editing a Performance but you have not stored it
before switching to another Performance, the edits you
have made will be cleared. If this happens, you can use the
Recall function to restore the Performance with your latest
edits intact.
1
2
3