User Manual

System Settings (Utility mode, etc.)
MOTIF XF Reference Manual
223
Voice mode
Song mode
Pattern mode
Mixing mode
Master mode
Utility mode
File mode
Performance
mode
Sampling
mode 1
Sampling
mode 2
Reference
From this display, you can specify certain automatic tasks
that the MOTIF XF will perform when power is turned on.
1 Auto Load
Determines whether the Auto Load function is on or off.
When this is on, the instrument will automatically load the
specified files (from the USB storage device) to User
memory—whenever the power is turned on. The file to be
loaded is shown on this display. The file to be loaded can
be specified via the [SF5] Get button.
Settings: on, off
2 Power On Mode
This determines the default power-on mode (and memory
bank)—letting you select which condition is automatically
called up when you turn the power on.
Settings:
performance
When turning the power on next time, the Performance Play mode is
entered and the first program number (USER: 001) is selected
automatically.
voice (USER1)
When turning the power on next time, the Voice Play mode is entered
and the first program number of User Voices (USR: 001) is selected
automatically.
voice (PRE1)
When turning the power on next time, the Voice Play mode is entered
and the first program number of Preset Voices (PRE: 001) is selected
automatically.
voice (GM)
When turning the power on next time, the Voice Play mode is entered
and the first program number of Preset GM Voices (GM: 001) is
selected automatically.
master
When turning the power on next time, the Master Play mode is entered
and the first program number (001) is selected automatically.
n Make sure to store the Utility settings to the internal memory by
pressing the [STORE] button before turning the power off.
Please keep in mind that the Utility settings will be lost if you
turn off the power without executing the Store operation.
3 [SF5] Select
Pressing this button calls up the Select Auto Load File
display. From this display you can specify the file (in the
external storage device) to be loaded automatically when
turning the power on (when Auto Load is set to on).
From this display you can specify the file (in the external
storage device) to be loaded automatically when turning
the power on (when Auto Load is set to on). Move the
cursor to the desired file then press the [ENTER] button to
determine the Auto Load File.
Parameters 1 – 4 are the same as the ones in the File
window (page 237) of the File mode.
Audio In/Out Settings—[F2] I/O
(Input/Output)
From this display you can set Audio In/Out parameters.
1 Mic/Line
When using the A/D INPUT jacks, this determines the input
source, microphone (mic) or line.
Settings: mic, line
mic
Intended for low output equipment, such as a microphone, electric
guitar or bass.
line
Intended for high output equipment, such as a keyboard, synthesizer,
or CD player.
2 L&R Gain
Determines the output gain of the OUTPUT L/MONO and R
jacks.
Settings: 0dB, +6dB
Setting the default display when
turning the power on—[SF4] Auto Load
1
2
3
Specifying the Auto Load File
[SF4]  [SF5] Select
1
2
3
4
Upper Level
Directory
1
!
2
3
4
5
6
7
8
9
)