User Manual

MOTIF XF Data List
151
Remote Control Assignments
Undo/Redo page
Function page
On/Off page
Cursor page
n • The Song Position Bar may not synchronize with the actual
playback position during Scrub playback.
• Parameters to be edited may differ depending on the
assigned Effect and Software Tone Generator.
• Some parameters may not be available depending on the
selected Effect Type.
• The [M2] – [M4] buttons correspond respectively to the
[EDIT], [JOB], and [STORE] buttons.
• Additional operations other than those listed above are
available. For details, refer to the relevant documentation of
DAW remote control you are using.
• You can find the Help window by selecting “Mackie Control”
from the Tool Menu on SONAR and pressing the [F1] button.
• Please keep in mind that some functions may not be
available.
 When controlling Digital Performer 6
A specific function has been assigned to each page. Use the
[SELECTED PART CONTROL] and [MULTI PART CONTROL] button
to select the desired page.
Assignment page
 PAN mode
[F2] Pan (or [F1] I/O  Knob 1  [ENTER])
Track Aux Main Dial Page List
Save Undo Redo E Bank Bank F M1
Buttons Functions
[F1] Save Executes the Save operation.
[F2] Undo Executes the Undo operation.
[F3] Redo Executes the Redo operation.
[F4] E Bank
[F5] Bank F
Scrolls through the track indication on the LCD of the
MOTIF XF every eight channels.
[SF1] Track Assigns a Track to a Fader.
[SF2] Aux Assigns an AUX BUS to a Fader.
[SF3] Main Assigns output level adjustment of the Virtual Main
Bus to the Faders.
F5 F6 F7 F8 Page List
F1 F2 F3 F4 – M1
Buttons Functions
[F1] F1 – [F4] F4
[SF1] F5
[SF2] F6
[SF3] F7
[SF4] F8
Defined in SONAR.
Jog PRM Loop On Home Dial Page List
Marker Loop Select Punch – M1
Buttons Functions
[F1] Marker Turns the Marker on or off.
[F6] M1 + [F1] Marker Open the window for entering the Marker to the
current song position.
[F2] Loop Turns the mode in which you can set the Loop
position on or off.
[F6] M1 + [F2] Loop Opens the Loop/Audio Shuttle dialog.
[F3] Select Turns the mode in which you can set From/Thru
time on or off.
[F6] M1 + [F3] Select Turns the function that selects the data in the
selected channel on or off.
[F4] Punch Turns the mode in which you can set Punch In/
Out on or off.
[F6] M1 + [F4] Punch Opens the Record Options dialog.
[EDIT] M2 + [F4] Punch Sets Punch In/Out Record to on, then sets
Punch In/Out position to the top of the song.
[F6] M1 + [G] In modes for which Loop position can be set
(From/Thru time, or Punch In/Out), this sets the
start position to the current position. Otherwise,
this sets the current position to the top of the
song.
[F6] M1 + [H] In modes for which Loop position can be set
(From/Thru time, or Punch In/Out), this sets the
end position to the current position. Otherwise,
this sets the current position to the end of the
song.
[SF1] Jog PRM Turns Data Entry on and off. When turned on
(the lamp lights), rotating the dial has the Data
Entry function.
[SF2] Loop On Sets Loop to on or off.
[SF3] Home Moves the song position to the top of the song.
EFScrub Dial Page List
Zoom E Bank Bank F M1
Buttons Functions
Cursor buttons
[F1] /[F2] /
[SF1] E/[SF2] F
Moves the cursor in the LCD of the MOTIF XF.
[F3] Zoom Turns Zoom on or off.
[F4] E Bank
[F5] Bank F
Scrolls through the track indication on the LCD
of the MOTIF XF every eight channels.
[SF3] Scrub Turns Scrub on or off. When Scrub is on, the dial
can be used for Scrub playback. When Scrub is
off, the dial is used to move the song position.
Sends Plug-ins Dyn Dial Page List
I/O Pan EQ E Bank Bank F Shift
Buttons Functions
[F1] I/O Calls up the Mode List display.
[F4] E Bank
[F5] Bank F
Scrolls through the track indication on the LCD of the
MOTIF XF every eight channels.
Buttons/Knobs Functions
Knobs 1 – 8 For editing parameters (such as Pan).
[SF3] + [ENTER] (with the cursor
on any channel.)
Resets the parameter value to the
default.
Call up the Fader Banks page,
then press [SF1] Flip
Exchanges the functions between the
Channel Knobs and the Faders.
[F2] Pan in the PAN mode Alternately hides/shows the Level
Meter.