User Manual

Remote Control Assignments
MOTIF XS Data List 2
56
Function page
Fader Group page
Project page
Preference page
Common Functions in all pages
n Parameters to be edited differ depending on the assigned
Effect and Software Tone Generator.
n Additional operations other than those listed above are
available. For details, refer to the relevant documentation of
DAW remote control you are using.
■ When controlling Logic Pro 7.2
A specific function has been assigned to each page. Use
the [SELECTED PART CONTROL] and [MULTI PART
CONTROL] button to select the desired page.
Assignment page
● SEND mode
● PLUG-INS mode
F5 F6 F7 F8 Page List
F1 F2 F3 F4 – Shift
Buttons Functions
[F1] F1 – [F4] F4
[SF1] F5
[SF2] F6
[SF3] F7
[SF4] F8
Defined in Cubase.
5678Page List
1234–Shift
Buttons Functions
[F1] F1 – [F4] F4
[SF1] F5 – [SF4] F8
Corresponds to 1 – 8 of the Channel View
on the Mixer window.
Save Revert Undo Redo Page List
Project Mixer Edit E Bank Bank F Shift
Buttons Functions
[SF1] Save Executes the Save operation.
[SF2] Revert Reverts to the status they had when the data
was saved last.
[SF3] Undo Executes the Undo operation.
[SF4] Redo Executes the Redo operation.
SoloDef E Channel Channel F Dial Page List
Project Mixer Edit E Bank Bank F Shift
Buttons Functions
[SF1] SoloDef Sets Solo for all channels to off.
[F6] Shift + [SF1]
SoloDef
Unmutes all channels.
[SF2] E Channel
[SF3] Channel F
Scrolls through the channel indication on the
LCD of the MOTIF XS channel-by-channel.
Buttons Functions
[F6] Shift + [EFFECT BYPAS
INSERTION]
Alternately hides/shows the Level
Meter.
Send Plug-ins Inst Dial Page List
Track Pan/Srnd EQ E Bank Bank F Shift
Buttons Functions
[F4] E Bank
[F5] Bank F
Scrolls through the track indication on the
LCD of the MOTIF XS every eight channels.
Buttons/Knobs Functions
[SF1] Send (Multi Channel View)
[SF1] Send → [SF1] Send (Track
Parameter View)
Assigns the settings related to
the Send Effect to the knobs
on the MOTIF XS. This applies
to the two View types listed at
left.
Cursor buttons [L]/[M]
(Multi Channel View)
Changes the Slot Number.
Knobs 1 – 8 → [ENTER] Edits each of the parameters.
When setting the Send
destination, turn the knob to
select it (indication flashes),
then press the [ENTER] button
to actually enter the selected
setting.
[ENTER] (with the cursor on any
channel; when the edit
parameter is Send Level)
Resets the parameter value to
the default.
[ENTER] (with the cursor on any
channel; when the edit
parameter is PRE/POST or Mute)
Changes the setup.
Call up the Cursor page, then
press the [SF1] E/[SF2] F
(Multi Channel View)
Changes the parameter to be
edited.
Call up the Cursor page, then
press the [SF1] E/[SF2] F
(Track Parameter View)
Switches between SEND 1/2
and SEND 3/4.
Buttons/Knobs Functions
[SF2] Plug-ins (Multi Channel View)
[SF2] Plug-ins → [SF2] Plug-ins
(Track Parameter View)
Assigns the settings related to
the Inserted Effect to the
knobs on the MOTIF XS. That
is enabled in two View types
described at left.
Cursor buttons [L]/[M]
(Multi Channel View)
Changes the Slot Number.
Knobs 1 – 8 → [ENTER] Turn the knob to select the
desired Plug-in for insertion
(indication flashes), then press
the [ENTER] button to actually
enter the selected setting.
[ENTER] (with the cursor on any
channel to which the Plug-in is
assigned.)
Calls up the parameter page
and opens the Editor window
on Logic.
Knobs 1 – 8 (Parameter page) Edits each of the parameters.