Reference Manual Contents Using the MOXF6/MOXF8 Manuals ............................. 2 Master Mode.............................................................. 128 Remote Mode ............................................................ 133 Basic Structure 3 Functional Blocks......................................................... 3 Tone Generator Block .................................................. 4 A/D Input Block ............................................................. 8 Sequencer Block.
Using the MOXF6/MOXF8 Manuals Your MOXF6/MOXF8 synthesizer comes with four different reference guides — the Owner’s Manual, the Reference Manual (this document), the Synthesizer Parameter Manual, and the Data List. While the Owner’s Manual is packaged together with the synthesizer as a hardcopy booklet, this Reference Manual, Synthesizer Parameter Manual, and the Data List are provided as PDF documents on the bundled CD-ROM.
Basic Structure Basic Structure Functional blocks Tone Generator block Functional Blocks A/D Input block The MOXF6/MOXF8 system consists of six main functional blocks: Tone Generator, A/D Input, Sequencer, Arpeggio, Arpeggio block Controller, and Effect.
Basic Structure Tone Generator Block The tone generator block is what actually produces sound in response to the MIDI messages received from the Sequencer block, Controller block, Arpeggio block and from the external MIDI instrument via the MIDI [IN] terminal or Functional blocks Tone Generator block the USB [TO HOST] terminal.
Basic Structure Drum Voices Drum Voices are mainly percussion/drum sounds that are assigned to individual notes on the keyboard. Unlike Elements, a Drum key is equivalent to the corresponding note, meaning that you cannot change its range. Drum or percussion sounds are assigned to each Drum Key.
Basic Structure Elements and Drum Keys Functional blocks Elements and Drum Keys are the smallest “building blocks” in the MOXF6/MOXF8 that comprise a Voice; in fact, only one Element or one Drum Key could be used to create a Voice. These small sound units can be built, enhanced and processed by a variety of traditional synthesizer parameters, such as Oscillator, Pitch, Filter, Amplitude, and LFO (shown below).
Memory structure of Voices Basic Structure Functional blocks Tone Generator block Normal Voices Preset Banks 1 – 9 1152 Normal Voices (128 Voices for each Bank) A/D Input block User Banks 1 – 3 384 Voices (128 Voices for each Bank) Sequencer block GM Bank 128 Voices Arpeggio block Controller block Drum Voices 72 Voices Effect block User Drum Bank 32 Voices Internal memory GM Drum Bank 1 Voice Preset Drum Bank Reference Tone Generator block in the Performance mode Voice mode Performance
Mixing Part. In this case, the sound of the Song/Pattern you created may change unexpectedly if you edit or delete the Voice used for the Song/Pattern Mixing in the Voice mode. Mixing Voices are provided to prevent these accidental sound changes. Basic Structure Functional blocks Tone Generator block A/D Input block Memory structure of Mixing Sequencer block A Mixing program is provided for each Song or Pattern. Selecting a different Song/Pattern calls up a Arpeggio block different Mixing program.
Basic Structure Sequencer Block This lets you create Songs and Patterns by recording and editing your performances as MIDI data (from the controller block), allowing you to play the data back with the tone generator block. Functional blocks Tone Generator block A/D Input block Sequencer block Arpeggio block Sequencer block in the Song mode Controller block Effect block About Songs Internal memory A Song is created by recording your keyboard performance as MIDI sequence data to individual Tracks.
Basic Structure Pattern Chain Functional blocks Pattern Chain allows you to string several different Sections (within a single Pattern) together to make a Tone Generator block single, complete Song. You can have the MOXF6/MOXF8 automatically change Sections by creating a A/D Input block Pattern Chain beforehand, recording Pattern playback with Section changes from the Pattern Chain Sequencer block display. One Pattern Chain can be created for each Pattern in the Pattern Chain display (page 103).
Basic Structure Song/Pattern Sequencer block Tone generator block Sequence data (Song, Pattern) Mixing Recording Track 1 Track 2 Track 3 : Track 16 Functional blocks Tone Generator block TxCH 2 2 3 : 16 RcvCH 2 3 3 : 16 Part 1 Part 2 Part 3 : Part 16 A/D Input block Sequencer block Arpeggio block Controller block Effect block Internal memory NOTE When you play the keyboard in the Mixing mode, the selected Part will not sound, but the Part assigned to the same numbered Track as the selected part
Basic Structure Mega Voices and Mega Voice Arpeggios Functional blocks Normal Voices use velocity switching to make the sound quality and/or level of a Voice change according to how strongly or softly you play the keyboard—giving greater authenticity and natural response to these Voices. However Mega Voices have a very complex structure with many different layers that is not suitable for playing manually.
Arpeggio type with a normal name (example: UpOct1) In addition to the above types, there are three playback types: the Arpeggios created for use of Normal Voices and played back using only the played notes and their octave notes (page 15), the Arpeggios created for use of Drum Voices (page 16), and Arpeggios containing mainly non-note events (page 16).
Basic Structure Arpeggio related settings There are several methods for triggering and stopping the Arpeggio playback. In addition, you can set whether or not SFX sounds and special Accent Phrases are triggered along with the normal sequence data. This section covers the Arpeggio related parameters which can be set in the Voice, Performance and Mixing modes.
Basic Structure Random SFX Functional blocks Some Arpeggio types feature a Random SFX function which will trigger special sounds (such as guitar Tone Generator block fret noises) when the note is released. The following parameters affecting Random SFX are provided.
Arpeggios for Drum/Percussion Voices (Category: DrPc) Basic Structure Functional blocks These Arpeggio types are programmed specifically for use with Drum Voices, giving you instant access Tone Generator block to various rhythm patterns. Three different playback types are available. A/D Input block Sequencer block Playback of a drum pattern Arpeggio block Pressing any note(s) will trigger the same rhythm pattern.
Basic Structure Controller Block This block consists of the keyboard, Pitch Bend and Modulation Wheels, Ribbon Controller, Knobs, Sliders and so on. The keyboard itself doesn’t generate sounds, but instead generates/transmits note on/off, velocity and other information Functional blocks Tone Generator block (MIDI messages) to the synthesizer’s tone generator block when you play notes. The controllers also generate/transmit A/D Input block MIDI messages.
Effect Block This block applies effects to the output of the tone generator block as well as audio input block, processing and enhancing the sound. Effects are applied in the final stages of editing, letting you change the sound as desired. Basic Structure Functional blocks Tone Generator block A/D Input block Sequencer block Effect structure Arpeggio block Controller block Effect block System Effects – Reverb and Chorus Internal memory System Effects are applied to the overall sound.
Basic Structure Effect connection in each mode Functional blocks Tone Generator block In the Voice mode A/D Input block 1 Element EQ applied to each Element (for a Normal Voice) and each Key (for a Drum Voice) Voice Element or Key Element EQ Settings: Can be set in the EQ display (pages 46 and 51) of Voice Element Edit/Voice Key Edit. Element 1 – 8 Drum Key C0 – C6 2 Common EQ applied to all Elements and Keys Settings: Set in the EQ display (page 32) of Voice Common Edit.
Basic Structure In the Performance mode Functional blocks 1 Part EQ applied to each Part Performance Settings: Set in the EQ display (page 67) of Performance Part Edit. Part EQ Insertion A/B Voice 2 Selection of the Parts to which the Insertion Effect is applied Settings: Set in the INS SW display (page 64) of Performance Common Edit.
Basic Structure About the Vocoder Effect MOXF6/MOXF8 features a Vocoder effect. Vocoder is a distinctive, “robot voice” effect which extracts the characteristic of the microphone sound and adds it to the sound via your keyboard performance. The human voice consists of sounds Functional blocks Tone Generator block generated from the vocal cords, and filtered by the throat, nose and mouth.
Basic Structure Internal Memory The MOXF6/MOXF8 creates a variety of different kinds of data, including Voice, Performance, Song, and Pattern. This section describes how to maintain the various types of data and use the memory devices/media for storing them.
Flash ROM ROM (Read Only Memory) is memory designed specifically for reading out data, and as such data cannot be written to it. Unlike conventional ROM, Flash ROM can be overwritten—allowing you to store your own original data. The contents of Flash ROM are maintained even when the power is turned off.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Reference This section provides a detailed description of the parameters used to configure your MOXF6/MOXF8. Display’s Basic Configuration 1 2 3 4 6 5 1 Indicates the selected Track. 2 Indicates the current edit status; for example, Common edit or Part edit. 3 Indicates the Voice/Performance/Song/Pattern/Master that is currently selected for editing. 4 Indicates the currently editable parameters.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Voice Mode Voice Mode Voice Play The Voice mode is used for selecting, playing, and editing desired Voices. This section explains each parameter in the four types (Voice Play, Normal Voice Edit, Drum Voice Edit, and Voice Job). Note that available parameters for editing differ depending on the Voice types (Normal Voice and Drum Voice).
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Voice Mode [F3] PORTA (Portamento) Voice Play From this display you can select monophonic or polyphonic playback and set the Portamento parameters. The setting [F1] PLAY made here will be applied to the same parameter in Voice Common Edit. [F3] PORTA NOTE When a Drum Voice is selected, the Portamento parameters are not available. [F4] EG Mono/Poly [F5] ARP ED Selects monophonic or polyphonic.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET [F5] ARP ED (Arpeggio Edit) FILE Voice Mode Voice Play Indicates the Arpeggio Edit display (page 27) in the Voice mode. [F1] PLAY [F3] PORTA [F4] EG [F6] EFFECT [F5] ARP ED Indicates the EFFECT display (page 35) of Voice Common Edit. [F6] EFFECT Arpeggio Edit [F2] TYPE Arpeggio Edit [F3] MAIN Sets the Arpeggio-related parameters.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET ChgTiming (Change Timing) Determines the actual timing at which the Arpeggio type is switched when you select another type during Arpeggio playback. When set to “realtime,” the Arpeggio type is switched immediately. When set to “measure,” the Arpeggio type is switched at the top of the next measure.
VOICE PERF OctaveRange SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET Knob Specifies the maximum Arpeggio range in octaves. Settings: -3 – +0 – +3 FILE Voice Mode Voice Play [F1] PLAY Loop [F3] PORTA Determines whether the Arpeggio plays through a single time or continuously, while notes are held. [F4] EG Settings: off, on TriggerMode When this is set to “gate,” pressing the note starts Arpeggio playback and releasing the note stops it.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET Normal Voice Edit A Normal Voice, which contains pitched musical instrument-type sounds that can be played over the range of the FILE Voice Mode Voice Play keyboard, can consist of up to eight Elements. There are two types of Normal Voice Edit displays: those for Common [F1] PLAY Edit to edit the settings common to all Elements, and those for Element Edit to edit individual Elements.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET [SF3] PORTA (Portamento) FILE Voice Mode Voice Play Switch (Portamento Switch) Determines whether or not Portamento is applied to your keyboard performance using the current Voice. [F1] PLAY [F3] PORTA Settings: off, on [F4] EG Time (Portamento Time) Determines the pitch transition time or rate when Portamento is applied.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET [F3] EQ FILE Voice Mode Voice Play This is a parametric EQ featuring three bands (High, Mid and Low). You can attenuate or boost the level of each [F1] PLAY frequency band (High, Mid, Low) to change the Voice sound. [F3] PORTA FREQ (Frequency) [F4] EG Determines the frequency for each frequency band. [F5] ARP ED Settings: Low: 50.1Hz – 2.00kHz [F6] EFFECT Mid: 139.7Hz – 10.1kHz High: 503.8Hz – 14.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET [F5] LFO (Low Frequency Oscillator) FILE Voice Mode Voice Play [SF1] WAVE [F1] PLAY [F3] PORTA Wave [F4] EG Selects the LFO waveform. [F5] ARP ED Settings: tri, tri+, sawup, sawdwn, squ1/4, squ1/3, squ, squ2/3, squ3/4, trpzd, S/H 1, S/H 2, user [F6] EFFECT Arpeggio Edit Speed Adjusts the speed (frequency) of LFO variation.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET [SF3] PHASE FILE Voice Mode Voice Play Phase Determines the starting phase point for the LFO Wave when it is reset. Settings: 0, 90, 120, 180, 240, 270 [F1] PLAY [F3] PORTA [F4] EG OFFSET EL1 – EL8 Determines the offset values of the “Phase” parameter (above) for the respective Elements.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Voice Mode [F6] EFFECT Voice Play [F1] PLAY [SF1] CONNECT [F3] PORTA [F4] EG 23 4 6 78 9 ) [F5] ARP ED [F6] EFFECT Arpeggio Edit 1 [F2] TYPE [F3] MAIN 23 5 ! @ # $ 1 EL: OUT 1 – 8 (Element Out 1 – 8) Determines which Insertion Effect (A or B) is used to process each individual Element.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Voice Mode ) Reverb Type Selects the Reverb Effect type. Voice Play Settings: For details on the editable Effect categories and types, see the “Data List” PDF document. Also, for details on the description for each Effect type, see the “Synthesizer Parameter Manual” PDF document. [F1] PLAY [F3] PORTA ! Chorus Return [F4] EG Determines the return level of the Chorus effect.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Voice Mode [SF2] VOCODER This display is called up via the [SF2] is available only when the “InsEF Connect” is set to “vocoder” in the [SF1] CONNECT display. The Vocoder-related parameters in this display determine the way in which the Vocoder is applied. Voice Play [F1] PLAY [F3] PORTA NOTE For more details about the Vocoder function, see page 21.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Voice Mode FormantOffset Finely adjusts the cutoff frequencies of all BPFs (for the Inst Input). This parameter can be used to fine-tune the pitch of the Vocoder sound. Settings: -63 – +0 – +63 Voice Play [F1] PLAY [F3] PORTA MicLvl (Mic Level) Determines the level of the microphone sound which is to be input to the Vocoder.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET Wave Bank Determines the Waveform Bank assigned to the Element. The available Banks are Preset (“pre”) and User (“user”). The Preset Bank includes the preset Waveforms while the User Bank includes the User Waveforms (stored to the optional Flash Memory Expansion Module).
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Voice Mode [F2] PITCH Voice Play [F1] PLAY [SF1] TUNE [F3] PORTA [F4] EG From this display you can set various pitch-related parameters for the selected Element. [F5] ARP ED Coarse (Coarse Tuning) [F6] EFFECT Determines the pitch of each Element in semitones. Arpeggio Edit Settings: -48 – +0 – +48 [F2] TYPE Fine (Fine Tuning) [F3] MAIN Determines the fine tuning for the pitch of each Element.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET [SF4] KEY FLW (Key Follow) From this display you can set the Key Follow effect—in other words, how the pitch of the Element and its Pitch EG respond to the particular notes (or octave range) you play. FILE Voice Mode Voice Play [F1] PLAY [F3] PORTA PitchSens (Pitch Key Follow Sensitivity) Determines the sensitivity of the Key Follow effect (the pitch interval of adjacent notes).
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Voice Mode HPFCutoff (High Pass Filter Cutoff Frequency) Determines the central frequency for the Key Follow parameter (below) of the HPF. When one of the filter types “LPF12+HPF12” or “LPF6+HPF12” is selected, this parameter is available. Voice Play [F1] PLAY Settings: 0 – 255 [F3] PORTA HPFKeyFlw (High Pass Filter Cutoff Key Follow) [F4] EG Sets the Key Follow function for the frequency of the “HPF Cutoff” parameter.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET [SF4] KEY FLW (Key Follow) From this display you can set the Key Follow effect for the Filter—in other words, how the tonal qualities of the Element and its Filter EG respond to the particular notes (or octave range) you play.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Voice Mode RandomPan Determines the amount by which the sound of the selected Element is panned randomly left and right for each note you press. The Pan setting (above) is used as the Center Pan position. Voice Play [F1] PLAY Settings: 0 – 127 [F3] PORTA ScalingPan [F4] EG Determines the degree to which the notes (specifically, their position or octave range) affect the Pan position, left and right, of the selected Element.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Voice Mode [SF4] KEY FLW (Key Follow) From this display you can set the Key Follow effect for Amplitude; in other words, how the volume of the Element and its Voice Play [F1] PLAY Amplitude EG respond to the particular notes (or octave range) you play.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Voice Mode KeyOnReset Determines whether or not the LFO is reset each time a note is played. Voice Play Settings: off, on Off [F1] PLAY On [F3] PORTA [F4] EG Time Key on Time [F5] ARP ED [F6] EFFECT Key on Arpeggio Edit KeyOnDelay [F2] TYPE Determines the delay time between the moment that a Note On message is received and the moment the LFO comes [F3] MAIN into effect.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET Drum Voice Edit Each Drum Voice can consist of up to 73 Drum Keys, assigned to notes spread across the keyboard (C0 to C6). There FILE Voice Mode Voice Play are two types of Drum Voice Edit: those for Common Edit to edit the settings common to all keys, and those for Key Edit [F1] PLAY to edit individual keys. This section explains the parameters for Common Edit and Key Edit.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Voice Mode [F6] EFFECT Voice Play This is the same as in Normal Voice Common Edit. See page 35. Please note that the “EL: OUT” (Element Out) [F1] PLAY parameter in the [SF1] CONNECT display is not available. [F3] PORTA KEY: OUT [F4] EG Determines which Insertion Effect (A or B) is used to process each individual Drum Key, and which is bypassed (thru).
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Voice Mode [SF4] OTHER From this display you can set various parameters related to how the individual notes of the Drum voice respond to the Voice Play [F1] PLAY keyboard and MIDI data. [F3] PORTA AssignMode [F4] EG Determines the playing method when the same notes are received continuously over the same channel, and without a corresponding note off message.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET [F3] FILTER FILE Voice Mode Voice Play [SF1] CUTOFF [F1] PLAY [F3] PORTA You can apply filter settings to the Drum Voice. The MOXF6/MOXF8 lets you apply a low pass filter and high pass filter to [F4] EG each individual Drum key. [F5] ARP ED LPFCutoff (Low Pass Filter Cutoff) Use this parameter to set a cutoff frequency for the low-pass filter.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Voice Mode [SF3] AEG (Amplitude EG) Voice Play AttackTime [F1] PLAY Settings: 0 – 127 [F3] PORTA Decay1Time [F4] EG Settings: 0 – 127 [F5] ARP ED [F6] EFFECT Decay1Level Arpeggio Edit Settings: 0 – 127 [F2] TYPE Decay2Time [F3] MAIN Settings: 0 – 126, hold Decay 2 Time = 0 – 126 [F4] LIMIT Decay 2 Time = hold [F5] PLAY FX Level Attack level Level Attack level Decay 1 level Normal Voice Edit Decay 1 level Com
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Voice Mode Voice Job Voice Job features several basic operations, such as Initialize and Copy. After setting parameters as required in the Voice Play [F1] PLAY selected display, press the [ENTER] button to execute the Job. [F3] PORTA Operation [VOICE] Voice selection [JOB] [F4] EG [F5] ARP ED [F6] EFFECT [F1] INIT (Initialize) Arpeggio Edit This resets (initializes) all Voice parameters to their default settings.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Voice Mode Supplementary Information Voice Play [F1] PLAY Voice Category List This is the list of the Main Categories and their Sub Categories to which the respective Voices of the MOXF6/MOXF8 [F3] PORTA [F4] EG belong.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET Functions of Knobs 1 – 8 FILE Voice Mode This section explains the functions assigned to Knobs 1 – 8 in the Voice mode. For instructions, see the Owner’s Manual.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Performance Mode Performance Mode Performance Play The Performance mode is used for selecting, playing, and editing the desired Performance. Performances can be made up of a maximum of four Parts (Voices), selected from the internal tone generator Parts 1 – 4. This section explains each parameter in four types (Performance Play, Performance Edit, Performance Job, and Performance [F1] PLAY [F2] VOICE [F3] PORTA Record).
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Performance Mode [F2] VOICE Performance Play From this mode you can select a Voice for each Part and determine the note range it can be played from. [F1] PLAY [F2] VOICE 1 [F3] PORTA 2 [F4] EG [F5] ARP ED [F6] EFFECT Arpeggio Edit 3 4 5 6 7 [F1] COMMON [F2] TYPE 1 Performance Name Indicates the selected Performance name. [F3] MAIN [F4] LIMIT 2 Part [F5] PLAY FX Indicates the selected part.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET [F5] ARP ED (Arpeggio Edit) FILE Performance Mode Performance Play Pressing this button calls up the Arpeggio Edit display of the Performance mode. [F1] PLAY [F2] VOICE [F3] PORTA [F6] EFFECT [F4] EG Pressing this button calls up the EFFECT display (page 63) of Performance Common Edit.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET [F2] TYPE FILE Performance Mode Performance Play These are the same as in the Arpeggio Edit display (page 27) of the Voice mode. [F1] PLAY [F2] VOICE [F3] PORTA [F3] MAIN These are the same as in the Arpeggio Edit display (page 27) of the Voice mode. However the “Tempo” parameter is not in the MAIN display of the Performance mode, and the following parameter is contained in the display.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET Performance Edit Each performance can contain a maximum of four Parts. There are two types of Performance Edit displays: those for FILE Performance Mode Performance Play Common Edit to edit the settings common to all four Parts, and those for Part Edit to edit the individual Parts. This [F1] PLAY section explains the parameters for Common Edit and Part Edit.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Performance Mode [SF5] OTHER A.Func1 (Assignable Function 1 Mode) A.Func2 (Assignable Function 2 Mode) Performance Play [F1] PLAY Determines whether the ASSIGNABLE FUNCTION [1] and [2] buttons function as latch (hold) type or momentary type. [F2] VOICE For details on settings, see the “Synthesizer Parameter Manual” PDF document.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Performance Mode [F3] MEQ (Master EQ) Performance Play From this display you can apply five-band equalization (LOW, LOW MID, MID, HIGH MID, HIGH) to all Parts of the [F1] PLAY selected Performance, or to all Voices.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Performance Mode [SF6] INFO (Information) Indicates the setting information for direct monitor switch, the output mode for the audio signal, and other information. Performance Play [F1] PLAY [F2] VOICE [F3] PORTA [F5] A/D IN (A/D Input) [F4] EG This display sets parameters related to the input from the A/D INPUT [L]/[R] jacks.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET 3 InsEF Connect (Insertion Effect Connection) Determines the effect routing for Insertion Effects A and B. The setting changes are shown on the diagram in the display, giving you a clear picture of how the signal is routed. Settings: insA>B, insB>A insA>B.....................................
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET [SF2] INS SW (Insertion Effect Switch) This display lets you set to which Parts the Insertion Effects are applied. FILE Performance Mode Performance Play [F1] PLAY [F2] VOICE [SF4] CHORUS [SF5] REVERB [F3] PORTA [F4] EG The number of parameters and values available differs depending on the currently selected effect type. For information on parameters, see the “Synthesizer Parameter Manual” PDF document.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Performance Mode ArpPlyOnly (Arpeggio Play Only) Determines whether or not the current Part plays only the note events of the Arpeggio playback. When this parameter is set to on, only the note events of the Arpeggio playback affect the tone generator block.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Performance Mode VelSensOfs (Velocity Sensitivity Offset) Determines the amount by which played velocities are adjusted for the actual resulting velocity effect. This lets you raise or lower all velocities by the same amount—allowing you to automatically compensate for playing too strongly or too softly.
VOICE PERF SONG RevSend (Reverb Send) PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Performance Mode Knob Set the stereo pan position for each Part. This lets you make detailed Reverb effect adjustments among the various sounds of the Drum Voice. Performance Play [F1] PLAY Settings: 0 – 127 [F2] VOICE DryLevel Determines the level of the unprocessed (dry) sound of the selected Part, letting you control the overall effect balance among the Parts.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Performance Mode [F4] TONE Performance Play You can set parameters related to the pitch and tone for each Part. This display sets the offset value to the same [F1] PLAY parameters in the Voice mode. [F2] VOICE [F3] PORTA [SF1] TUNE [F4] EG [F5] ARP ED NoteShift Determines the pitch (key transpose) setting for each Part in semitones.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET [F5] RCV SW (Receive Switch) FILE Performance Mode Performance Play From this display you can set how each individual Part responds to various MIDI data, such as Control Change and [F1] PLAY Program Change messages. When the relevant parameter is set to “on,” the corresponding Part responds to the [F2] VOICE appropriate MIDI data.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Performance Mode Performance Job Performance Job features several basic operations, such as Initialize and Copy. After setting parameters as required in Performance Play [F1] PLAY the selected display, press the [ENTER] button to execute the Job.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET Performance Mode [SF2] VOICE This convenient operation lets you copy Effect and Master EQ settings of a certain Voice assigned to a certain FILE Performance Play 1 [F1] PLAY Performance to the Common parameters of the currently [F2] VOICE edited Performance. This would come in handy when a [F3] PORTA certain Performance has settings that you want to use in your [F4] EG Performance program.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET Performance Record You can record your keyboard performance in the Performance mode to a Song or Pattern. A part of the Knob FILE Performance Mode Performance Play operations, the Controller operations, and Arpeggio playback as well as your keyboard playing in the Performance [F1] PLAY mode can be recorded to the specified Track as MIDI events.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Performance Mode [F2] REC TR (Record Track) Performance Play [F1] PLAY 1 2 [F2] VOICE [F3] PORTA [F4] EG [F5] ARP ED [F6] EFFECT 3 1 RecTrack (Record Track) Determines the Tracks of the Song/Pattern as the destination for recording. Arpeggio Edit [F1] COMMON [F2] TYPE [F3] MAIN 2 PERFPART (Performance Part) Indicates the Tracks of the Song/Pattern as the destination for recording according to the “RecTrack” setting.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Performance Mode Supplementary Information Performance Play [F1] PLAY Performance Category List This is the list of the Main Categories and their Sub Categories to which the respective Performances of the MOXF6/ [F3] PORTA MOXF8 belong.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY Knob 2 Knob 3 Knob 4 VOLUME PAN ASSIGN 1 ASSIGN 2 Knob 6 Knob 7 Knob 8 LOW MID F MID HIGH [PERFORM] [EDIT] [COMMON] [F2] OUT/MFX [SF1] OUT “Volume” page 60 Part Edit [PERFORM] [EDIT] Number [1] – [4] button [F2] OUTPUT [SF1] VOL/PAN “Volume” of the selected part page 66 Common Edit [PERFORM] [EDIT] [COMMON] [F2] OUT/MFX [SF1] OUT “Pan” page 60 [F3] PORTA Part Edit [PERFORM] [EDIT] Number [1] –
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Song Mode Song Mode Song Play The Song mode lets you record, edit and play your own original Songs. This section explains each parameter in four types (Song Play, Song Record, Song Edit, and Song Job). [F1] PLAY [F2] GROOVE [F3] TRACK Song Play [F6] CHAIN Song Play is the main “portal” by which you enter the Song mode, and it is here where you select and play a Song.
VOICE 7 PERF (Tempo) SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Song Mode Knob Determines the Song playback tempo. Song Play Settings: 5.0 – 300.0 NOTE If you are using this instrument with an external sequencer, DAW software, or MIDI device, and you want to synchronize it with that device, set the “MIDI Sync” parameter in the Utility MIDI display (page 148) to “external” or “auto.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET [F3] TRACK FILE Song Mode Song Play [SF1] CHANNEL [F1] PLAY [F2] GROOVE From this display you can set the MIDI output channel for each of the sixteen Tracks of the corresponding internal/ [F3] TRACK external tone generator.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET Song Recording FILE Song Mode Song Play Song Record Standby mode [SONG] Song selection [REC] Operation [F1] PLAY [F2] GROOVE [F3] TRACK [F6] CHAIN Song Record [F1] SETUP Song Record Standby [F1] SETUP Type [F2] VOICE Determines the Recording Type. The Recording Type can be divided into two groups: Realtime recording and Step [F3] ARP ED recording.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET Meas (Measure) Determines the measure from which Song recording will be started. You can set this parameter also by using the window for inputting a number directly called up via the [SF6] NUM button. FILE Song Mode Song Play [F1] PLAY [F2] GROOVE [F2] VOICE [F3] TRACK [F6] CHAIN In this display you can set the Voice-related parameters for the recording Track.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Song Mode During Song Recording Song Play Operation [SONG] Song selection [REC] [R] (Play) [F1] PLAY [F2] GROOVE In Realtime recording, the editable parameters during recording are in the [F1] SETUP display, [F2] VOICE display, and [F3] ARP ED display of the Song recording standby mode. In Step recording, the displays shown during recording are different from the Song recording standby mode.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Song Mode [F3] REST Song Play Press [F3] to enter a rest as long as the specified step time. The point will move ahead to the next data-entry position. [F1] PLAY Rests do not appear on the display. [F2] GROOVE NOTE There is no actual data representing rests in the MIDI sequencer. When a “rest” is entered the pointer simply moves ahead to the next data-entry position, effectively leaving a rest.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET QtzStrength (Quantize Strength) Determines the offset value for “QtzStrength” in the [F5] PLAY FX display. This parameter is applied to all parts. Settings: -100 – +0 – +100 FILE Song Mode Song Play [F1] PLAY VelocityRate [F2] GROOVE Determines the offset value for “VelocityRate” in the [F5] PLAY FX display. This parameter is applied to all parts.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Song Mode Song Edit This mode gives you comprehensive, detailed controls for editing the MIDI events of individual Song Tracks. MIDI Song Play events are messages (such as note on/off, note number, program change number, etc.) that make up the data of a [F1] PLAY recorded Track. It can be used to correct mistakes as well as add dynamics or effects such as vibrato to refine and [F2] GROOVE finish the Song.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Song Mode PitchBend These are the events that define continuous changes in pitch and they are generated by Pitch Bend Wheel operation. DATA Song Play [F1] PLAY Determines the Pitch Bend data. Settings: -8192 – +8191 ProgramChange Program change events are used to select Voices. BANK [F2] GROOVE [F3] TRACK [F6] CHAIN Song Record Song Record Standby Determines the Voice bank. The voice bank consists of MSB and LSB.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET RPN (Registered Parameter Number) These events are used to change the parameter values for each tone generator Part. This event is used to set part settings such as Pitch Bend Sensitivity or Tuning. MSB-LSB See “Registered Parameter Number MSB/LSB” in the “MIDI” section of the “Synthesizer Parameter Manual” PDF document.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Song Mode Song Job The Song Job mode contains a comprehensive set of editing tools and data transform functions you can use to change Song Play the sound of the Song. It also includes a variety of convenient operations, such as copying or erasing data. See the [F1] PLAY Owner’s Manual for instructions. [F2] GROOVE [F3] TRACK NOTICE An “Executing...” message is shown when it takes a short amount of time to execute the Job.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Song Mode GateTime Determines the gate time (the length of time a note sounds) of the even-numbered backbeat notes to enhance the swing feel. When a triplet quantize value is used, the gate time of the last note of each triplet is adjusted. When the quantize value is 8th note + 8th note triplet or 16th note + 16th note triplet, the gate time of the even-numbered 8th note Song Play [F1] PLAY or 16th note beats will be adjusted.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET 04: Crescendo This Job lets you create a crescendo or decrescendo over the specified range of notes. (Crescendo is a gradual increase in volume, and decrescendo is a gradual decrease.) FILE Song Mode Song Play [F1] PLAY [F2] GROOVE TR (Track) 001 : 1 : 000 – 999 : 4 : 479 Determines the Track (01 – 16, all) and range of measures/beats/clocks over which the Job is applied.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET StartStep (Starting Step) EndStep (Ending Step) Determines the size of the step (i.e., the number of clocks) between each note in the roll. The smaller the value, the finer the roll. Both the starting and ending clock values can be specified, making it easy to create rolls in which the step size FILE Song Mode Song Play [F1] PLAY varies during the roll.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Song Mode [F3] EVENT (Event Job) Song Play Pressing this calls up the selected Job display. [F1] PLAY NOTE Before executing the Event Job, make sure that you specify the Track and range (measure: beat: clock) to which the Job is [F2] GROOVE applied. Please note that the Track to be specified varies depending on the Job.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Song Mode 04: Extract Event This Job moves all instances of specified event data from a specified range of a Track to the same range in a different Song Play [F1] PLAY Track. [F2] GROOVE TR (Track) 001 : 1 : 000 – 999 : 4 : 479 [F3] TRACK Determines the Track (01 – 16) and range of measures/beats/clocks over which the Job is applied. [F6] CHAIN Song Record EventType Selects the event type to be extracted.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Song Mode 06: Thin Out This Job thins out the specified type of continuous data in the specified range—allowing you to free up memory space Song Play [F1] PLAY for other data or further recording. [F2] GROOVE TR (Track) 001 : 1 : 000 – 999 : 4 : 479 Determines the Track (01 – 16, all) and range of measures/beats/clocks over which the Job is applied.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Song Mode [F4] MEAS (Measure Job) Song Play Pressing this calls up the selected Job display. [F1] PLAY [F2] GROOVE 01: Create Measure [F3] TRACK [F6] CHAIN This Job creates empty measures at the specified location in all Tracks.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Song Mode [F5] TRACK (Track Job) Song Play Pressing this calls up the selected Job display. [F1] PLAY [F2] GROOVE 01: Copy Track [F3] TRACK This Job copies all data of the selected type from a specified source Track to a specified destination Track.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Song Mode 05: Normalize Play Effect This Job rewrites the data in the selected Track so that it incorporates the current Grid Groove settings. Song Play [F1] PLAY TR (Track) [F2] GROOVE Determines the Song Track to which the Job is applied.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Song Mode Supplementary Information Song Play [F1] PLAY Song Playback Types [F2] GROOVE [F3] TRACK Playback from the middle of the Song [F6] CHAIN To start playback of the Song from midway through the Song, set the desired location by using the controls below, then press the [R] (Play) button. These operations can also be executed during playback.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET Registering the Song Scene After making the desired settings for the Scene, simultaneously hold down the [STORE] button and press one of the [SF1] to [SF6] buttons. The 8th note icon is shown in the tab corresponding to the Sub Function button to which the Song Scene is registered. Press the [STORE] button to store the Song data including the Song Scene settings.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET Song Track Loop – setting example In the example below, a 40-measure Song has been recorded and Track 1 is set to play back normally over the 40 measures. Track 2 has been set to loop, and will repeat until the [J] (Stop) is pressed. When set to on, you can specify the range to be looped. (Only the end point can be set; the start point of looped playback is fixed to the beginning of the Song.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET Punch In/Out (Type = punch) FILE Song Mode You can use this method when you want to re-record only over a specific area of the Track. You’ll need to set the start and end points before re-recording. In the eight-measure example below, measures three through five are re-recorded.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Pattern Mode Pattern Mode Pattern Play The Pattern mode lets you play, record, edit and play your own original rhythm patterns. This section explains each parameter in four types (Pattern Play, Pattern Record, Pattern Edit, and Pattern Job). NOTE The word “Pattern” refers to a short rhythmic passage of several measures which is looped and played back indefinitely. A Pattern includes 16 variations called “Sections.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Pattern Mode [F4] PATCH Pattern Play From this display, you can assign a Preset Phrase or a User Phrase (recorded in the Pattern Record mode) to each [F1] PLAY Track and create a Pattern that contains up to 16 Tracks. You can assign a User Phrase created with the currently [F2] GROOVE selected Pattern.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Pattern Mode [F5] REMIX Pattern Play This function gives you a variety of semi-random presets for dividing the MIDI sequence data and altering the note [F1] PLAY lengths, letting you create completely new variations of a Pattern. Set the parameters below, then press the [ENTER] [F2] GROOVE button to execute the Remix operation. If you want to keep the changes, press the [SF5] OK button.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET Pattern Mode During Pattern Recording Operation FILE [PATTERN] [F6] CHAIN [REC] [R] (Play) Pattern Play [F1] PLAY When recording the Pattern Track, you can change the Section. When recording the tempo Track, you can change the [F2] GROOVE tempo value. When the Scene Track is selected, you can record Track muting settings.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET Pattern Record FILE Pattern Mode Pattern Play Pattern Record Standby mode [PATTERN] Pattern selection [REC] Operation [F1] PLAY [F2] GROOVE [F3] TRACK [F4] PATCH [F5] REMIX [F1] SETUP NOTE The Phrase length is specified by the length parameter in the PLAY display of the Pattern mode. [F6] CHAIN Pattern Record Pattern Record Standby [F1] SETUP Type Determines the Recording Type.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Pattern Mode [F5] CLICK Pattern Play Pressing the [F5] CLICK button lets you turn the click sound (metronome) on/off for recording. [F1] PLAY NOTE In the CLICK display (page 144), you can make various settings for the metronome click, such as the note resolution, volume, [F2] GROOVE and lead-in count for recording.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Pattern Mode Pattern Job The Pattern Job mode contains a comprehensive set of editing tools and functions you can use to change the sound of Pattern Play the Pattern. The setting instructions are the same as in the Song Job (page 87). After setting parameters as required in [F1] PLAY the selected display, press the [ENTER] button to execute the Job. [F2] GROOVE [F3] TRACK NOTICE An “Executing...
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Pattern Mode 06: Thin Out Pattern Play Same as in Song Job. See page 93. [F1] PLAY [F2] GROOVE 07: Modify Control Data [F3] TRACK Same as in Song Job. See page 93. [F4] PATCH NOTE Unlike in Song Job, you cannot select “Tempo” as an Event Type. [F5] REMIX [F6] CHAIN 08: Beat Stretch Pattern Record Same as in Song Job. See page 93.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET Pattern Mode 06: Get Phrase From Song This Job copies a segment of sequence-Track data from a FILE Pattern Play Source Song, Track, and range of measures to be copied. Song into the designated destination Phrase. After specifying [F1] PLAY the source Song/Track/Measure and the destination Phrase, as [F2] GROOVE well as setting the checkboxes as necessary, press the [F3] TRACK [ENTER] to execute this Job.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET Pattern Mode 03: Clear Track This Job deletes all data of the selected type from the FILE Pattern Play Section and Track from which data is to be cleared selected Pattern Track. The types of data to be cleared are [F1] PLAY [F2] GROOVE the same as in Song Job. See page 95.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET Pattern Mode 02: Append Pattern Appends one Pattern to the end of another to create one longer Pattern with all 16 Tracks. FILE Source Pattern and Section Pattern Play Destination Pattern and Section [F1] PLAY [F2] GROOVE NOTE If the Pattern length becomes greater than 256 measures as a result of the Append Pattern Job, an error message will be displayed and the Job will be aborted.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Pattern Mode Supplementary Information Pattern Play [F1] PLAY Pattern Playback Types [F2] GROOVE [F3] TRACK Starting playback by pressing a note [F4] PATCH When the Keyboard Start function is set to on, Pattern playback begins as soon as you press a key on the keyboard. Move the cursor to the Keyboard Start icon then press the [INC] button in the PLAY display of the Pattern Play to enable Keyboard Start.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET Loop Recording (Pattern) FILE Pattern Mode Pattern Play Operation [PATTERN] [REC] [F1] SETUP “Loop” = “on” [F1] PLAY [F2] GROOVE Pattern repeats the rhythm pattern of several measures (1 to 256 measures) in a “loop,” and its recording is also done using loops. This method is used when recording a Pattern Phrase using the Overdub method.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET Mixing Mode FILE Mixing Mode Mixing Play The settings of the tone generator block for Song/Pattern playback are collectively referred to as a Mixing. The Mixing mode lets you change the Voice and effect settings for each Part. This section explains each parameter in four types (Mixing Play, Mixing Edit, Mixing Job, and Mixing Voice Edit).
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET [F3] EF SEND (Effect Send) FILE Mixing Mode Mixing Play From this display you can make basic effect settings for each Part—including Send Level for the System Effects [F1] VOL/PAN (Chorus, Reverb,) as well as the Dry Level for Insertion Effects. [F2] VOICE NOTE For information on the effect connections in the Song mode, see page 20.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Mixing Mode Mixing Edit The Mixing Edit mode lets you control typical mixer settings such as volume balance, pan position and effects, allowing Mixing Play you to fine tune the Song/Pattern data. Mixing Edit consists of Part Edit and Common Edit. This section explains the [F1] VOL/PAN parameters for Common Edit and Part Edit.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Mixing Mode Part Edit Mixing Play Operation [SONG]/[PATTERN] Song/Pattern selection [MIXING] [EDIT] Number [1] – [16] [F1] VOL/PAN [F2] VOICE [F3] EF SEND [F1] VOICE Determines the Voice for each Part. This display shows only four Parts at a time (Part 1 – 4, Part 5 – 8, Part 9 – 12, or Part 13 – 16). To switch the editable Parts, press the Cursor [<]/[>] buttons.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET [SF3] LIMIT From this display you can determine the note range and velocity range for each Part. The parameters are the same as in Performance Part Edit. See page 65. FILE Mixing Mode Mixing Play [F1] VOL/PAN [F2] VOICE [SF4] PORTA (Portamento) [F3] EF SEND [F4] TEMPLATE Determines the Portamento parameters for each Part. The parameters are the same as in Performance Part Edit. See page 65.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET [SF4] AEG (Amplitude EG) From this display you can set the AEG parameters for each Part. The parameters offset the same parameters of the assigned Voice set in the Voice mode (page 44). The parameters are the same as in Performance Part Edit. See page FILE Mixing Mode Mixing Play [F1] VOL/PAN 68. [F2] VOICE NOTE The Sustain setting is not available for Parts to which Drum Voices have been assigned.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Mixing Mode Mixing Job The Performance Job features several basic operations, such as Initialize and Copy. After setting parameters as required in the selected display, press the [ENTER] button to execute the Job.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET [SF3] PERFORM (Performance) This convenient operation lets you copy certain settings of the four Parts in a performance to the Mixing program currently being edited. You can check the appropriate check boxes for the desired settings of the Reverb Effect, Chorus FILE Mixing Mode Mixing Play [F1] VOL/PAN Effect, Master Effect, Master EQ, Insertion Effect, and A/D input part to execute this job.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET Mixing Voice Edit In this mode, you can edit the Voices assigned to Mixing Parts 1 – 16 respectively and store them as Mixing Voices. The FILE Mixing Mode Mixing Play Mixing Voice Edit settings are applied only to Normal Voices. When a Normal Voice is selected, the Voice Edit [F1] VOL/PAN parameters are divided into Common Edit (parameters common to all four Elements), and Element Edit (parameters of [F2] VOICE individual Elements).
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Mixing Mode [F2] PITCH Mixing Play Same as in Normal Voice Element Edit (page 40). [F1] VOL/PAN [F2] VOICE [F3] EF SEND [F3] FILTER [F4] TEMPLATE Same as in Normal Voice Element Edit (page 41). [F5] VCE ED [F6] EFFECT Mixing Edit [F4] AMP (Amplitude) Common Edit Same as in Normal Voice Element Edit (page 43).
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Mixing Mode Supplementary Information Mixing Play [F1] VOL/PAN Editing a Performance by using the Knobs By using the knobs on the front panel, you can adjust various parameters such as pan, effect, cutoff frequency and [F2] VOICE [F3] EF SEND resonance for each Part (Track) of the Mixing. [F4] TEMPLATE 1 2 Press one of the Knob Function buttons (1 or 2) to call up the Control Function display.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET Mixing Mode When the [EFFECT] lamp is turned on: Knob 5 CHO PRESET [SONG]/[PATTERN] Song/Pattern selection [MIXING] [EDIT] [COMMON] [F6] EFFECT [SF4] CHORUS “Preset” Knob 6 CHO SEND [SONG]/[PATTERN] Song/Pattern selection [MIXING] [F3] EF SEND part selection “CHO SEND” Knob 7 REV PRESET [SONG]/[PATTERN] Song/Pattern selection [MIXING] [EDIT] [COMMON] [F6] EFFECT [SF4] CHORUS “Preset” Knob 8
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET Determining how Song/Pattern data is converted to an Arpeggio – Convert Type MIDI sequence data (of Song/Pattern Tracks) can be converted to Arpeggio data in one of three ways, according to the Convert types below. These types can also be selected independently for each destination Track—providing enormous flexibility and performance control.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE 3 Press the [F2] TEMPLATE button. 4 Set the Template number and name. 5 Press the [ENTER] button. [F2] VOICE After the confirmation prompt appears, press the [ENTER] [F3] EF SEND Template number Mixing Play [F1] VOL/PAN button to store the new template. To cancel the operation, press the [EXIT] button.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Master Mode Master Mode Master Play This synthesizer is loaded with such a wealth of different features, functions and operations, you may find it difficult to locate and call up the particular feature you need. This is where the Master function comes in handy. The MOXF6/ MOXF8 has space for a total of 128 of your own User Master settings.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET [SF1] ARP1 (Arpeggio 1) – [SF6] ARP6 (Arpeggio 6)/ [SF1] SCN1 (Scene 1) – [SF6] SCN6 (Scene 6) When the memorized mode is Voice, Performance, or Pattern, a different Arpeggio type is assigned to each of the [SF1] ARP1 – [SF6] ARP6 buttons according to the Voice/Performance/Pattern number. The Arpeggio types are assigned to the buttons with 8th note icons on the display tab.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Master Mode Master Edit The Master Edit mode lets you create your own original Master programs—containing up to four different Zones Master Play (keyboard areas)—by editing the various parameters. In the Master mode, you can divide the keyboard into (up to) four [F1] PLAY independent areas (called “Zones”).
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET [F3] TX SW (Transmit Switch) FILE Master Mode Master Play From this display you can set how each individual zone affects transmission of various MIDI data, such as Control [F1] PLAY Change and Program Change messages. When the relevant parameter is set to “on,” playing the selected zone will [F2] MEMORY transmit the corresponding MIDI data.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Master Mode [F5] KNOB Master Play [F1] PLAY CtrlKnobUp (Control Knob Upper) CtrlKnobLo (Control Knob Lower) [F2] MEMORY From this display you can determine which Control Change numbers are used for the Knobs for each Zone. These settings are available only when the “ZoneKnob” parameter (in the [F3] ZONE SW display in Master Play) is set to “on.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Remote Mode Remote Mode Remote display In the Remote mode, you can use the Knobs and buttons of this instrument to control the sequencer Tracks and mixer channels of the DAW software on the computer.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Remote Mode Remote Control Assignments Remote display Switching the Control Template for the VSTi Remote Control Assignments To switch the Control Templates of the MOXF6/MOXF8, use the BANK SELECT [DEC]/[INC] buttons. Switching the functions of Knobs 1 – 4 Press the Knob Function 1 button to switch the functions assigned to the Knobs 1 – 4 in descending order, “1” | “2” | “3.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Remote Mode Operating by the Function buttons The functions of the DAW software can be operated by the Function buttons and Sub Function buttons. When “DAW Remote display Select” is set to “Cubase,” the appropriate functions of Cubase are assigned to the buttons. This section explains about Remote Control Assignments the specific functions for the Function buttons when “DAW Select” is set to “Cubase.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Remote Mode MOXF6/MOXF8 Extension Setup window Remote display The functions can be assigned to the [SF1] – [SF6] buttons in the MOXF6/MOXF8 Extension Setup window shown in Remote Control Assignments Cubase. This section explains about the MOXF6/MOXF8 Extension Setup window. Startup Method Select the “Device” menu, then select the “MOXF6/MOXF8 Extension Setup” in Cubase. Indicates the MOXF6/MOXF8 Extension Setup window.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET 7 Buttons for the Memory 1 – 6 Determines which Memory is assigned to the [SF1] – [SF6] buttons. 8 Memory name FILE Remote Mode Remote display Remote Control Assignments Determines the name for the Memory specified by parameter (7) above; maximum 16 characters in length. 9 Load Loads the file to which the settings of the MOXF6/MOXF8 Extension Setup window are stored.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Remote Mode Mute/Solo You can mute or solo the currently selected Track in Cubase by Remote display pressing the respective [MUTE]/[SOLO] button on the MOXF6/MOXF8. Remote Control Assignments Moving the cursor/ Program Change function The cursor [<]/[u]/[d]/[>] buttons work as cursor controls on the DAW software. The [EXIT] button works as the key on a computer, while the [ENTER] button works as the key.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET Utility settings FILE Remote Mode Press the [UTILITY] button to call up the display for the Utility settings dedicated to the Remote mode. See page 141 for Remote display details about the each parameter.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET Utility Mode FILE Utility Mode [F1] GENERAL In the Utility mode, you can set parameters that apply to the entire system of the MOXF6/MOXF8. This mode is actually a sub-mode of the Voice/Performance/Song/Pattern mode. Press the [UTILITY] button in each mode to enter the Utility mode and press the [EXIT] button after making settings to go back to the previous mode. [F2] VOICE [F2] SEQ [F3] VCE A/D Operation Press the [UTILITY] button.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET VelCurve (Velocity Curve) These five curves determine how the actual velocity will be generated and transmitted according to the velocity (strength) with which you play notes on the keyboard. The graph shown in the display indicates the velocity response FILE Utility Mode [F1] GENERAL curve.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET ProgChangeMode (Program Change Mode) Determines what messages will be transmitted to the computer when you operate the [INC]/[DEC] buttons or [DATA] dial. When “PC” is selected, Program Change messages will be transmitted via MIDI Port 1. When “remote” is selected, FILE Utility Mode [F1] GENERAL Remote Control messages will be transmitted via MIDI Port 2.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET Knob DispTime (Knob Display Time) Determines whether or not the KNOB FUNCTION pop-up window appears when operating the Knobs, and how long the popup will continue to be shown. Settings: off, 1 sec, 1.5 sec, 2 sec, 3 sec, 4 sec, 5 sec, keep off....................... When this selected, the popup is not called up even if you operate the Knobs. 1 sec – 5 sec .....
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET [F2] SEQ (Sequencer) FILE Utility Mode [F1] GENERAL These special Song- and Pattern-related settings are available only when entering the Utility mode from the Song or Pattern mode. [SF1] CLICK From this display you can set the parameters related to the click sound (metronome) that is used during recording or playback in the Song/Pattern mode.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET NOTE Keep in mind that settings other than “off” may result in slower operation—for example, a pause before starting playback, or FILE Utility Mode slower rewind/fast forward speed. NOTE When this is set to “all,” an excessive amount of MIDI data may be generated, possibly resulting in a MIDI error on the connected device.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET AF1 (Assign Function 1 Control Number) AF2 (Assign Function 2 Control Number) Determines the Control Change number generated when you use the ASSIGNABLE FUNCTION [1]/[2] buttons.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET 1StereoRec........ The audio signal from the A/D INPUT [L]/[R] jacks and the tone generator are output together to the “USB 1/2” channels of the USB TO [HOST] jack. This mode is for using the 1 stereo channels (2 channels) as output channels.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET KBDTransCh (Keyboard Transmit Channel) Determines the MIDI channel over which the instrument sends MIDI data (to an external sequencer, tone generator, or other device). This parameter is available in the single-timbre tone generator mode (Voice/Performance modes).
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET NOTE When setting the MOXF6/MOXF8 so that Arpeggio playback is synchronized to an external MIDI clock, make sure to set the devices so that the MIDI clock from the DAW software/ external MIDI device is properly transmitted to the MOXF6/MOXF8 from the DAW software/ external MIDI devices. ClockOut Determines whether MIDI clock (F8) messages will be transmitted via the MIDI OUT/USB terminal.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Utility Mode Utility Job In the Utility Job mode, you can restore this synthesizer’s User memory (page 23) to the factory default settings (Factory [F1] GENERAL Set). Please note that the setting of “Power On Auto” on this display will be stored automatically by executing Factory [F2] VOICE Set.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Quick Setup Quick Setup [F1] SETUP Using Quick Setup can instantly call up appropriate sequencer-related panel settings by selecting convenient preset setups, allowing you to simultaneously and instantly set a variety of important sequencer-related parameters. [F2] AUDIO [F3] MIDI Operation Press the [QUICK SETUP] button. [F1] SETUP This display determines the six Quick Setup settings. This display consists of two pages.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE Quick Setup Quick Setup 3 (Drct Arp) “Audio”=”Config2” This setting is same as Quick Setup 1. [F1] SETUP “MIDI”= ”Config3” Use this setting when recording this instrument’s performance including Arpeggio data to the DAW software. Keep in mind that this is for recording Arpeggios for which “KeyMode” is set to “direct,” “sortdirect,” or “thrudirect.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE File Mode File Mode [F1] CONFIG The File mode provides tools for transferring data (such as Voice, Performance, Song, Pattern, and Waveform) between the MOXF6/MOXF8 and external storage devices such as USB flash memory or a hard disk unit connected to the USB [F2] SAVE [F3] LOAD [TO DEVICE] terminal. [F4] RENAME Operation [F5] DELETE Press the [FILE] button.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET next highest level (directory A). Next, go up one more level (to the root directory). Now that both A and B are available, open directory B. In this way you can move up or down as desired through the folder hierarchy. FILE File Mode [F1] CONFIG Path [F2] SAVE The location of the directories (folders) and files currently indicated at the “Dir” line on the display is referred to as a [F3] LOAD “path.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE File Mode [F2] SAVE [F1] CONFIG Currently selected directory File name [F2] SAVE [F3] LOAD [F4] RENAME [F5] DELETE [F6] FLASH Supplementary Information File/Directory selection box This operation lets you save files to a USB flash memory device. For specific operating procedures, see the Owner’s Manual.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE File Mode [F3] LOAD [F1] CONFIG [F2] SAVE Currently selected folder (directly) [F3] LOAD [F4] RENAME [F5] DELETE [F6] FLASH Supplementary Information File/Folder selection box This operation lets you load files from a USB flash memory device to this synthesizer. You can also perform on the keyboard while playing backing parts from an SMF file contained in the USB flash memory. For details, see page 160.
VOICE File Types PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE File Mode Extension* Descriptions .X6A .X6P .MID A specified Pattern in a file that is saved to the USB flash memory as an “All” or “AllPattern” type can be individually selected and loaded to the instrument. Please note that the file icons F of “X6A” and “X6P” are changed to G (as virtual directories) when this file type is selected.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE File Mode [F4] RENAME [F1] CONFIG Select the desired file type. [F2] SAVE Select the file/folder to be renamed. [F3] LOAD [F4] RENAME [F5] DELETE [F6] FLASH Supplementary Information Rename the selected file/folder here. Rename the selected file/directory here. You can rename files using up to eight alphabetic and numeric characters. Files are named according to MS-DOS naming conventions.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET [SF2] DELETE Use this function to delete a single Waveform. Select the Waveform, then press the [ENTER] button to delete the FILE File Mode [F1] CONFIG selected Waveform. [F2] SAVE NOTE When entering this function from Voice mode, you can monitor the selected Waveform by playing the keyboard. [F3] LOAD [F4] RENAME [SF3] OPTIMIZE Use this function to optimize the Flash Expansion Memory Module.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET FILE File Mode Supplementary Information [F1] CONFIG [F2] SAVE File/Folder selection The illustrations and instructions below show you how to select files and directories on a USB flash memory device [F3] LOAD [F4] RENAME within the File mode. [F5] DELETE [F6] FLASH Supplementary Information To return to the next highest level, press the [EXIT] button.
VOICE PERF SONG PATTERN MIX MASTER REMOTE UTILITY QUICK SET Formatting a USB flash memory device Before you can use a new USB flash memory device with this instrument, you will need to format it. The correct way to format such a device is as follows. NOTICE If data is already saved to the USB flash memory device, be careful not to format it. If you format the device, all previously recorded data will be deleted. Make sure to check beforehand whether or not the device contains important data.
Using iOS Applications Basic Structure Functional blocks You can use various iOS applications with this instrument by connecting to an iPad, iPhone or iPod touch device via the Tone Generator block optional i-MX1/i-UX1 MIDI interface—giving you even greater enjoyment and musical versatility. For details how to A/D Input block connect this instrument to the iPad/iPhone/iPod touch, refer to the i-MX1/i-UX1 Owner’s Manual.
Basic Structure Appendix Functional blocks Tone Generator block About MIDI A/D Input block MIDI is an acronym that stands for Musical Instrument Digital Interface, which allows electronic musical instruments to Arpeggio block communicate with each other, by sending and receiving compatible Note, Control Change, Program Change and Controller block various other types of MIDI data, or messages.