User Manual

Voice Parameters
45
Key Mode Determines how the Arpeggio plays back when playing the keyboard.
 Sort: When you play specific notes (for example, the notes of a
chord), the same sequence plays, no matter what order you play the
notes.
 Thru: When you play specific notes (for example, the notes of a
chord), the resulting sequence differs depending on the order of the
notes.
 Direct: Note events of the Arpeggio sequence do not play; only the
notes you play on the keyboard are heard. When the Arpeggio plays
back, events such as Pan and Brightness are applied to the sound of
your keyboard performance. Use this setting when the Arpeggio
types include non-note data or when you set the Arpeggio Category
to Control.
 Sort+Direct: The Arpeggio is played back according to the Sort
setting, and the notes played are also sounded.
 Thru+Direct: The Arpeggio is played back according to the Thru
setting, and the notes played are also sounded.
Velocity Mode Adjusts the Velocity of the Arpeggio notes.
 Original: The Arpeggio plays back at the preset Velocities included
in the Arpeggio sequence data.
 Thru: The Arpeggio plays back according to the Velocity of your
playing. For example, if you press the keys strongly, the playback
volume of the Arpeggio is high.
Output Octave Shift Shifts the pitch of the Arpeggio up or down in octaves.
Unit Multiply Adjusts the Arpeggio playback time based on tempo.
By using this parameter, you can create a different Arpeggio type from the
original one.
 200%: The playback time will be doubled and the tempo is halved.
 100%: The normal playback time.
 50%: The playback time will be halved and the tempo doubled.
Quantize Value Determines to which beats the note data in the Arpeggio will be aligned, or
determines to which beats in the Arpeggio the swing is applied.
Quantize Strength Sets the "strength" by which note events are pulled toward the nearest
quantize beats.
 0%: No quantization.
 50%: The note events are pulled halfway between 0% and 100%.
 100%: Exact timing as set by Quantize Value.
Swing Delays notes on even-numbered beats (backbeats) to produce a swing
feel.
 +1 and higher: Delay the Arpeggio notes.
 -1 and lower: Advance the Arpeggio notes.
 0: Exact timing as set by Quantize Value, resulting in no swing.
Judicious use of this setting lets you create swing rhythms and triplet feels,
such as shuffle and bounce.