User Manual

Effects

2-3-11 M

Manual Determines a specific value, depending on the selected Effect type.

For VCM Flanger, this parameter determines the offset value of the delay

modulation.

For VCM Phaser mono and VCM Phaser stereo, this parameter

determines the offset value of the phase modulation.

Meter Changes the meter.

Mic Gate Threshold Determines the threshold level of the noise gate for the microphone sound.

If noise interferes with the Vocoder effect, set this parameter to a relatively

high value to prevent noise from producing inadvertent, unexpected

sounds.

Mic Level Determines the input level of the microphone sound.

Mic L-R Angle Determines the L/R angle of the microphone.

Mid Attack Determines the amount of time from the moment a key is pressed to the

moment the compressor is applied to the mid frequencies.

Mid Gain Determines the output gain for the mid frequencies.

Mid Level Determines the output level for the mid frequencies.

Mid Mute Switches the mute status of the mid frequencies.

Mid Ratio Determines the ratio of the compressor for the mid frequencies.

Mid Threshold Determines the minimum input level at which the effect is applied for the

mid frequencies.

Mix Determines the volume of the effect sound.

Mix Level Determines the level of the effect sound mixed with the dry sound.

Mod Depth Determines the depth of the modulation.

Mod Depth Ofst R Determines the depth of the modulation for R channel as offset.

Mod Feedback Determines the feedback level to the modulation.

Mod Gain Determines the gain of the modulation.

Mod LPF Cutoff

Frequency

Determines the Cutoff Frequency of the Low-Pass Filter applied to the

modulated sound.

Mod LPF Resonance Determines the Resonance of the Low-Pass Filter for the modulated

sound.

Mod Mix Balance Determines a specific value, depending on the selected Effect type.

For Noisy, this parameter determines the mix balance of the modulated

element.

For Tech Modulation, this parameter determines the volume of the

modulated sound.

Mod Speed Determines the modulation speed.

Mod Wave Type Selects the wave type for modulation.

Mode Determines the phaser type, or more specifically, the factor for forming the

phaser effect.

Modulation Phase Determines the L/R phase difference of the modulated wave.

Move Speed Determines how long it takes to move the sound from the current status to

the sound specified via the Vowel parameter.