User Manual

MOXF6/MOXF8 Remote Editor Windows: [File] menu
MOXF6/MOXF8 Remote Editor Owner’s Manual
11
Setup
Selects the MIDI port of the MOXF6/MOXF8 and the DAW software. Selecting this menu calls up the following
window. Set the parameters as necessary, then click [OK].
•MIDI Port
“Yamaha MOXF6/MOXF8” is automatically selected when the MOXF6/MOXF8 and the computer are connected
properly via USB.
•DAW Select
Specify the DAW software you are currently using here.
VSTi Database
Scans through the DAW software you are using and obtains the VSTi-related information necessary for editing.
This menu consists of the following two menus.
Selecting “Full Scan” scans the entire DAW software. When you scan the DAW for the first time, select “Full Scan.”
Selecting “Update” scans only the sections that have been updated since previous scanning. When you've
installed a new VSTi, select “Update.”
The “Full Scan” is automatically executed when you start the MOXF6/MOXF8 Remote Editor the first time or you
change the DAW Select settings in the Setup window.