User Manual

Operation flow from starting the application to closing it
MOXF6/MOXF8 Remote Editor Owner’s Manual
3
Operation flow from starting the application to
closing it
The MOXF6/MOXF8 Remote Editor is a software contained in the MOXF6/MOXF8 Remote Tools. After
installing the MOXF6/MOXF8 Remote Editor and related applications by following the Installation Guide of
the MOXF6/MOXF8 Remote Tools, follow the instructions below. Before starting, make sure that the MOXF6/
MOXF8 is properly connected to the computer via a USB cable. There is no single way to use the many
components in the MOXF6/MOXF8 Remote Editor. Your editing needs and preferences may differ; however,
the following example gives you a simple step-by-step guide in how to use the MOXF6/MOXF8 Remote
Editor.
n For details about connection between the MOXF6/MOXF8 instrument and a computer, refer to the Owner’s Manual of the
MOXF6/MOXF8.
n On the MOXF6/MOXF8, press the [UTILITY] to enter the Utility mode, then press the [F6] MIDI followed by the [SF4]
OTHER. On this display, set the MIDI In/Out parameter to “USB,” then press the [STORE] button to store this Utility setting.
n After completing installation of the MOXF6/MOXF8 Remote Editor, start the DAW software once then quit it. This operation
is necessary to scan through the DAW software for obtaining the VSTi-related information. Only DAW software produced
by Steinberg (such as Cubase) can be scanned.
1. Start the MOXF6/MOXF8 Remote Editor with the following operations.
Windows
[Start] 
[All Programs]  [Yamaha MOXF6_MOXF8 Remote Editor] [MOXF6_MOXF8
Remote Editor]
Mac
[Applications] 
[Yamaha]  [MOXF6_MOXF8]  [MOXF6_MOXF8 Remote Editor]
The Auto Sync window appears and the settings of the 50 Control Templates on the MOXF6/MOXF8 are
transferred automatically to the Current Bank (page 9) of the MOXF6/MOXF8 Remote Editor.