User Manual

Operation flow from starting the application to closing it
MOXF6/MOXF8 Remote Editor Owner’s Manual
4
After transfer has been successfully completed, the Edit window appears.
n If data transfer in the Auto Sync window fails even when the MOXF6/MOXF8 and computer are connected
properly, make sure to set the MIDI In/Out parameter to “USB” and the Device Number parameter to “1” or “All”
in the Utility MIDI display on the MOXF6/MOXF8.
2.Select “Setup” from the [File] menu to call up the Setup window.
3.Confirm that the MIDI Port is set to “Yamaha MOXF6/MOXF8,” then select the desired
DAW software from the DAW Select column.
If the MOXF6/MOXF8 and the MOXF6/MOXF8 Remote Editor are connected properly via USB, you can
confirm that the MIDI Port is set to “Yamaha MOXF6/MOXF8” when the above window appears. The
DAW selection is necessary for performing the Scan operation (“VSTi Database” menu in the [File]
menu) and obtaining the VSTi-related information.