User Manual

MOXF6/MOXF8 Remote Editor Windows: Edit window

MOXF6/MOXF8 Remote Editor Owner’s Manual

)-2 CC (Control Change) section

Assigns the function to the Function Assignment box selected in the 9 Edit section. The setting here is

available when the Remote/CC button is set to “CC.” Clicking “CC” at the left of this section also sets the

Remote/CC button of the Edit section to “CC.”

• CC Number (Control Change Number)

Determines the Control Change number. Selects the Control Change number by clicking one of the scroll

buttons at the right of this box. You can also input the Control Change number directly.

• Display Name

Selects the Knob’s function name which is to be shown on the display of the MOXF6/MOXF8 when the

Remote/CC button of 9 Edit section is set to “CC.” Click the triangular button at the right of this box, then

select the desired one. You can also input the name directly.

• Display Format

Sets the value format shown on the display of the MOXF6/MOXF8 to “0 – 127” or “-64 – +63.”

! Detail button

Clicking this button closes the Controller Settings section. Click this again to open the Controller Settings

section.

When closing the Controller Settings section