User Manual

MOXF6/MOXF8 Owner’s Manual

Quick Guide

4 Select the desired Voice from the list, then press

the [ENTER] button.

The Performance Play display will appear.

The Voice selected in the Voice mode will be assigned to

Part 1, and the Voice selected after pressing the [LAYER]

button will be assigned to Part 2. These two Voices are

sounded simultaneously in a layer as a “Performance.”

You can confirm what Voices are layered on the display called

up via the [F2] VOICE button.

5 Press the [STORE] button to store the settings as

a Performance.

NOTE When you press the [EDIT] button in the Store display, you

can check the sound of the Performance at the storing

destination.

Split—Playing two different Voices

with your left and right hands

This section shows you how to create a Performance in which

the keyboard is divided (or split) into two sections—the left-

hand section and the right-hand. The lowest note of the right-

hand section is referred to as the “Split Point.” By creating

such a Performance, you can play a bass part with your left

hand, and a piano part with your right hand, for example.

1 Select a Voice in the Voice mode.

2 Press the [SPLIT] button on the panel.

The Category Search display appears.

Move the cursor to “SPLITPOINT” then set the Split

Point.

You can determine the Split Point by holding the [SHIFT]

button then pressing the desired note on the keyboard.

NOTE

The note set to the Split Point is included in the upper section

of the keyboard.

4 Move the cursor to “LO/UP” then select whether

the desired Voice is assigned to the lower section

or the upper section of the keyboard.

NOTE When the original Voice is a Drum Voice, Split is not applied

to the part assigned the Drum Voice. In this case, only the

desired Voice is assigned to the keyboard range according

to the “SPLITPOINT” and “LO/UP” settings.

5 Move the cursor to “Main”/“Sub” then select the

Category that includes your desired Voice.

6 Press the Cursor [>] button.

The Voice list is shown.