User Manual

MOXF6/MOXF8 Owner’s Manual
Quick Guide
47
Creating an original Pattern
The Pattern mode also lets you record your rhythm patterns
or riffs to the different Sections as you wish—and as the
inspiration hits—then combine the Sections into a Pattern
Chain to create a complete Song. Along with the Arpeggio
feature and Performance recording, you have a wide range
of easy-to-use tools to quickly create fully arranged,
professional sounding Songs.
Listening to the Demo Patterns
Before creating your own original pattern, you should give a
listen to some of the preset Demo Patterns. These specially
recorded Patterns cover a wide range of musical genres and
are full of great hints and ideas on how you can create and
use Patterns in your own music.
1 Press the [PATTERN] button to enter the Pattern
mode.
The Pattern Play display will appear.
2 Select a Pattern by turning the [DATA] dial.
3 Press the [F] (Play) button to start playback of the
Pattern.
The Pattern will play back repeatedly until you press the [J]
(Stop) button.
4 Press the [PATTERN SECTION] button then
change Sections, selecting from A – P.
Pressing the [1] – [8] buttons calls up Sections A – H and
pressing the [9] – [16] buttons calls up Sections I – P.
NOTE
By changing the Sections, you can create rhythmic variations
,
and easily improvise arrangements (such as intro, verse,
chorus, verse, chorus, ending) in real time.
Creating a Pattern (Section A) by
using Arpeggio
In addition to creating a Pattern by recording your keyboard
performance conventionally, you can also use the powerful
Arpeggio playback features of this instrument.
Here, create data for Section A by recording Arpeggio
playback to Track 1 as the drum part, Track 2 as the guitar
part and Track 3 as the bass part.
1 Press the [PATTERN] button to enter Pattern Play
then select a Pattern.
2 Press the [PATTERN SECTION] so that its lamp
lights then press the Number [1] button to select
Section A.
3
On the Pattern Play display, set the Pattern Length,
Time Signature and Tempo.
4 Press the [TRACK] so that its lamp lights then
press the Number [1] button to select Track 1.
5 Press ARP [EDIT] [F3] MAIN, then set the
“Switch” parameter to “on” and set the
“VoiceWithARP” parameter to “on.”
With the “Switch” parameter “on,” the Arpeggio of Track 1
can be played back. When the Arpeggio Type is selected
with the “VoiceWithARP” parameter “on,” the Voice
appropriate for the selected Arpeggio Type will be
automatically called up.
6 Press the ARP [ON/OFF] button so that its lamp
lights.
1st measure
120th measure
Intro
Melody A
Melody B
Main theme
Melody B
Main theme
Ending
Section A
Section B
Section C
Section D
Section E
Section F
Section G
Section A – H [PATTERN SECTION] button
Section I – P
Time Signature Tempo Length