User Manual

Menu: [File] menu

MOXF6/MOXF8 Editor Owner’s Manual

5 Auto Sync Setting

This section lets you set how the data synchronization between the MOXF6/MOXF8 Editor and the

MOXF6/MOXF8 instrument is executed when “OFFLINE” is changed to “ONLINE.” Actual data

synchronization is executed from the Auto Sync window (page 50) called up automatically under certain

circumstances such as clicking the [OFFLINE] button, starting the MOXF6/MOXF8 Editor and opening a

new file on the Editor.

Global

Determines whether or not the Global data (see page 3) is synchronized and which data (MOXF6/

MOXF8 Editor or MOXF6/MOXF8 itself) is synchronized with the other.

Current

Determines whether or not the Current data (see page 3) is synchronized and which data (MOXF6/

MOXF8 Editor or MOXF6/MOXF8 itself) is synchronized with the other.

Voice

Determines whether or not the Voice data (see page 3) is synchronized and which data (MOXF6/MOXF8

Editor or MOXF6/MOXF8 itself) is synchronized with the other.

Auto Start

When this is set to “On” and one of the following operations is executed, data synchronization will be

started automatically as soon as the Auto Sync window is opened.

• When clicking “OFFLINE” after setting the MIDI IN/OUT parameter correctly in the Utility mode on the

MOXF6/MOXF8, setting the MIDI Ports correctly on the computer, and making a proper connection.

• When the connection between the MOXF6/MOXF8 and a computer are corrected after appropriately

correcting the setup of the MOXF6/MOXF8 and the computer.

• When the settings on the MOXF6/MOXF8 instrument and the computer are corrected after appropriately

reconnecting the devices.

• When the settings on the MOXF6/MOXF8 instrument and the computer are corrected after appropriately

launching the MOXF6/MOXF8 Editor.

n The parameters set here apply also to the parameters having the same names in the Auto Sync window.

NOTICE

When the Auto Start parameter is set to “On,” data synchronization is started automatically under certain

circumstances (page 50) such as clicking the [OFFLINE] button, starting the Editor and opening a new file on the

Editor. Keep in mind that this will cause unexpected data loss on the MOXF6/MOXF8 Editor or the MOXF6/MOXF8

itself, since new data automatically overwrites old data upon data synchronization. Make sure to save your important

data before using the MOXF6/MOXF8 Editor.

6 Knob Guide

Determines whether or not the Knob Guide (knob editing area) appears when adjusting a knob. Setting

this to On conveniently enlarges the knob editing area (as shown), making it much easier to edit a knob’s

parameter.

Knob Guide: On Knob Guide: Off