User Manual

Tips
MOXF6/MOXF8 Editor Owner’s Manual
51
Tips
Recording to Cubase MIDI tracks with the MOXF6/MOXF8 Editor VST
The following instructions show you how to record to Cubase MIDI tracks with the MOXF6/MOXF8 Editor VST.
1. Create a MIDI track and start the MOXF6/MOXF8 Editor VST in Cubase by executing the
steps on pages 4 – 5.
On the Editor VST, set the mode to “Song” or “Pattern.”
2. Make the settings for recording.
On the MOXF6/MOXF8:
Create a Quick Setup including the following settings on the MOXF6/MOXF8, then select the created
Quick Setup.
The Quick Setup can be selected from the Editor VST as well as on the MOXF6/MOXF8 itself.
n • Local Control should be set to “off” to prevent a “double” sound from both the MOXF6/MOXF8 keyboard
and Cubase. This is because Cubase receives MIDI data from the MOXF6/MOXF8, then “echoes” (sends it
as is) back to the MOXF6/MOXF8 (page 55).
•The Direct MonitorSw Part should be set to “on” so that you can monitor the recording sound without latency
(page 55).
On Cubase:
Set the Instrument channel of the Editor VST to “mute on” so that you monitor the
sound directly.
On the Editor VST:
Select a Voice for the Recording Part.
n When the Editor VST is set to “Song” or “Pattern,” the Part which is connected to the
current Editor VST track (MIDI track) of Cubase will be automatically selected on the
Editor VST. For example, when you select the Cubase MIDI track which is connected to
Part 1 of the MOXF6/MOXF8, Part 1 is automatically selected on the MOXF6/MOXF8
Editor VST.
3. Start recording to the Cubase MIDI track.
For details about this operation, see the Cubase manual.
Simply play the MOXF6/MOXF8 following the Cubase tempo click or the sound of
another audio track.
IMPORTANT
If you want to monitor the already recorded MOXF6/MOXF8 Editor VST track (MIDI track) on
recording, it is recommended to convert the MIDI track data to audio data beforehand. If you do
not so, playback of your recorded performance may not be synchronized with playback of the
MOXF6/MOXF8 Editor VST track.
MIDI Local Ctrl off
MIDI Sync auto (Enables MOXF6/MOXF8 playback to be synchronized with Cubase.)
Clock Out off
ArpOutSw all off (Disables MIDI output of Arpeggio playback data from MOXF6/MOXF8
.)
AUDIO Mode VST
Direct MonitorSw Part on (Enables you to monitor the MOXF6/MOXF8 sound directly.)