Operation Manual

An Example of MOXF6/MOXF8 Editor in Use: Mixing edit in the Song or Pattern mode
MOXF6/MOXF8 Editor Owner’s Manual
10
6-4 Click [Store] to store the edited Voice to the selected number in the selected Bank.
Performing this operation will store the Voice data to the User Voice Bank in the MOXF6/MOXF8
instrument as well as that within the Editor.
NOTICE
When you execute the Store operation, the settings for the destination memory (of both the Editor and instrument)
will be overwritten. Select the destination Voice number carefully to prevent important data from being erased
accidentally. For this reason, important data should always be saved to a separate USB storage device.
n You can store the settings of the parameters in the “G” row except for the Chorus and Reverb settings by
clicking [Store Global] under [Edit] in the menu bar.
Mixing edit in the Song or Pattern mode
This section explains how to edit a Mixing program in the Song mode.
1. Change the mode to the Song mode by clicking [Song] of the [Voice]/[Song]/[Pattern]
indication.
The Auto Sync appears automatically during ONLINE status.
2. From the Auto Sync window, click [Start] at the bottom.
Data synchronization will be started if the Port settings are correct. As soon as data synchronization is
completed, the Auto Sync window is closed.
3. Edit the parameters of the Mixing and Voice assigned to each Part.
If you want to change the parameter values from the original ones of the selected Song or Pattern, click
(drag and drop) each of the parameters such as EQ and effect lined up to the right of “G” in the Global/
Multi section and “1” – “16” in the Part section.