Operation Manual

MOXF6/MOXF8 Editor Window: When the Voice/Song/Pattern is set to “Song” or “Pattern” (Mixer section)

MOXF6/MOXF8 Editor Owner’s Manual

2 [Part 1-16]/[AD Part] tab

Selects the Parts to be edited from [Part 1-16] and [AD Part]. The illustration below indicates that the

[Part 1-16] tab is selected.

3 Part

When [Part 1-16] is selected:

This section lets you edit parameters for each Part. Clicking any of 1 – 16 turns the corresponding Part

on. In the example illustration below, Part 1 is active.

n When editing any of the Voice parameters such as Element parameters for each Part, a small square

appears at the top right of the “1” – “16” box until you store the edited Voice as a User Voice or Mixing Voice

or you save the edited data as a file. This indication is the same as the [V] indicator (page 29).

Part (Part number)

Indicates the Part number. Clicking here turns the corresponding Part on.

n In some situations, selecting a Part number on the Editor may not change a Part number on the MOXF6/

MOXF8 and vice versa, even if the Editor is in the ONLINE status. If you come across such a situation and

you want to match the Part number of the MOXF6/MOXF8 with the one in the Editor, change the Part number

via the panel controls of the MOXF6/MOXF8.

Mute/Solo

1 Mute

Sets the Mute status for each Part. Clicking “M” here changes the Mute status for all Parts

simultaneously.

2 Solo

Selects the Solo Part. Only one Part can be soloed at a time.

Category, Bank, No. and Voice Name

Indicates the Category Bank and name of the Voice assigned to each Part. When clicking here, the

VOICE LIBRARY window appears at the right half section, letting you select a different Voice for the

current Part. Using the VOICE LIBRARY is the same here as in the Voice mode; for details, refer to

page 16.

EQ Lo, Mi, Hi (Part EQ)

Adjusts the equalizer settings for each Part.

Ins.FX (Insertion Effect Switch)

Switches the Insertion Effect on or off.

n Insertion Effects can be applied up to eight Parts.

Cho, Rev, Pan (Chorus, Reverb, Pan)

Adjusts the Chorus Send level, Reverb Send level, and stereo Pan position for each Part by using the

graphic knobs.