Owner's Manual

Troubleshooting

MOXF6/MOXF8 Remote Editor Owner’s Manual

Troubleshooting

Even when I click the triangular button at the right of VSTi Select/Input box in the Edit

window, the VSTi plug-ins registered to the DAW software are not shown as expected.

• The MOXF6/MOXF8 Remote Editor may not properly recognize the VSTi registered in the DAW

software. Select [File]  [VSTi Database]  [Full Scan] to search the VSTi information (page 11).

The parameters set on the MOXF6/MOXF8 Remote Editor are not displayed on the

MOXF6/MOXF8.

• The display on the MOXF6/MOXF8 is based on the information sent from Cubase (see the illustration

above). Start Cubase and select the corresponding VSTi within Cubase.

Even when I change the VSTi on the DAW software such as Cubase, the Control

Template on the MOXF6/MOXF8 does not change corresponding to the newly

selected VSTi.

• The VSTi-related information is obtained through the Extension software (see the illustration below).

Make sure that the latest MOXF6/MOXF8 Extension is installed.

• Make sure that the VSTi name displayed on the DAW software is the same as the one shown in the

VSTi Select/Input box (page 7).

Data transfer between the MOXF6/MOXF8 Remote Editor, MOXF6/MOXF8 and DAW software:

Turning the Knobs on the MOXF6/MOXF8 affects Remote parameters other than

those intended for control.

• In Cubase, remove the checkmarks of “ALL MIDI Inputs” corresponding to MIDI Ports 2 and 5 for the

MOXF6/MOXF8 instrument.

Even when I click the triangular button at the right of Control Parameter in the Edit

window, the appropriate Control Parameters are not shown.

• Make sure that the VSTi is correctly selected in the VSTi Select/Input box (page 7). If you have input

the VSTi name directly, make sure that the spelling is correct and the placement of spaces (if any) is

correct. We recommend that you select the VSTi by clicking the triangular button at the right of VSTi

Select/Input box, instead of inputting the VSTi name directly.

DAW software (Cubase, etc.)

Note On/Off, Control Change

VSTi

MOXF6/MOXF8

Extension

Remote Control

VSTi parameters (name, value)

MOXF6/MOXF8 parameters

Port 1

Port 2

Port 5

Computer MOXF6/MOXF8

instrument

MOXF6/MOXF8

Remote Editor