Owner's Manual

Tips

MOXF6/MOXF8 Editor Owner’s Manual

4. Play back the recorded data.

Make the following settings then listen to the playback sound through the Cubase mixer.

MOXF6/MOXF8 Instrument

Direct MonitorSW Part: off

Cubase Mixer

MOXF6/MOXF8 Editor VST instrument channel: mute off

You can enhance the sound by applying EQ or effects to the Editor VST track (MIDI track). For detailed

instructions, refer to the Cubase manual.

5. Convert the recorded MIDI track to audio data.

On Cubase, select [File]  [Export]  [Audio Mixdown] to convert the recorded MIDI data to audio

data. For details, see Cubase manual.

6. Create an additional MIDI track for Editor VST.

On Cubase, select [Project]  [Add Track]  [MIDI] to add the MIDI track.

Set the Input routing of the track to “All MIDI Inputs” and Output to “MOXF6/

MOXF8 VST.” You can record additional tracks by repeating steps 2 to 6 above.

7. Save the Cubase Project.

On Cubase, select [File]  [Save] or [Save As...] to save the Cubase Project.

Recording/Editing Arpeggio playback as MIDI data on Cubase

If you set the Arpeggio to “on” on the Editor VST in step 2 on page 51, you can record your performance

including the Arpeggio playback as audio. If you only want to record Arpeggio playback as audio data, then

follow the previous instructions. However, if you want to edit the MIDI events of the recorded Arpeggio, follow

the instructions here below.

1. Create a MIDI track and start the MOXF6/MOXF8 Editor VST in Cubase by executing the

steps on pages 4 – 5.

On the Editor VST, set the mode to “Song” or “Pattern.”

2. Make the settings for recording.

On the MOXF6/MOXF8:

Create a Quick Setup including the following settings on the MOXF6/MOXF8, then select the created

Quick Setup.

The Quick Setup can be selected from the Editor VST as well as on the MOXF6/MOXF8 itself.

MIDI Local Ctrl on

MIDI Sync auto

Clock Out off

ArpOutSw all on (Enables MIDI output of Arpeggio playback data from the MOXF6/

MOXF8)

TrExtSw When the Key Mode is set to other than “direct,” “sortdirect,” or “thrudirect”:

all off (Disables MIDI output of played notes)

When the Key Mode is set to “direct,” “sortdirect,” or “thrudirect”:

all on (Enables MIDI output of played notes)

AUDIO Mode VST

Direct MonitorSw Part on (Enables you to monitor the MOXF6/MOXF8 sound directly.)