User Manual

MOXF6/MOXF8 Owner’s Manual
Quick Guide
51
3 Press the [F3] Song button to call up the “Convert
to Song” display, then select an empty Song and
the top measure for the destination.
4 Press the [ENTER] button to execute the
conversion.
The Pattern Chain data will be converted to Song data, and
the converted data will be copied to the top measure
specified in step 3.
NOTICE
This operation overwrites any data already existing at the destination
Song.
5 Press the [SONG] button, select the Song
specified in step 3, then press the [F] (Play) button
to hear the newly created Song data.
6 Press [STORE]  [F1] SEQ  [ENTER] to store the
created Song.
This operation will store all the Song/Patterns.
Connecting external MIDI
instruments
With a standard MIDI cable (available separately), you can
connect an external MIDI instrument, and control it from the
MOXF6/MOXF8. Likewise, you can use an external MIDI
device (such as a keyboard or sequencer) to control the
sounds on
the MOXF6/MOXF8 . Below are several different
MIDI connection
examples; use the one most similar to your
intended setup.
NOTE Any one of these interfaces can be used for MIDI data
transmission/reception: the MIDI connectors, or the USB [TO
HOST] connector. However, they cannot be used at the same
time. Select which connector is to be used for MIDI data transfer
in the “MIDI IN/OUT” parameter of the [UTILTITY]  [F6] MIDI 
[SF4] OTHER display. As you work through the explanations in
this chapter, set “MIDI IN/OUT” to “MIDI” since MIDI is used as
the example connection here.
Controlling MOXF6/MOXF8 from an external MIDI
keyboard or synthesizer
Use an external keyboard or synthesizer to remotely select
and play the Voices of the MOXF6/MOXF8.
For the destination, select the Song and
the top measure.
If the “without PC” is checkmarked, executing this operation
will ignore the Program Change events in the Pattern data.
MIDI [IN]
MOXF6/MOXF8
MIDI [OUT]
External MIDI keyboard such as an 88-key synthesizer