User Manual

ManualsBrandsYamaha ManualsSynthesizerMOXFシリーズ

MOXF6/MOXF8 Editor Installation Guide 6

An audio connection between the MOXF6/MOXF8 instrument and the computer is needed to use the MOXF6/

MOXF8 Editor VST correctly. With such a connection, the MOXF6/MOXF8 Editor VST provides full functionality,

including the freeze function, mixing within the Audio Mixer of Cubase series, and other convenient features

common to other VST instrument software.

When connecting the computer and instrument directly via Yamaha Steinberg USB driver, the audio connection

(Port settings, etc.) will be set automatically.

When connecting the computer and instrument by using the separate audio interface via Yamaha Steinberg USB

driver, you should set the audio connection manually. After installing the audio interface driver correctly, select the

audio ports in the VSTi Setup window within the MOXF6/MOXF8 Editor VST

n When using the MIDI connection via Yamaha Steinberg USB Driver, you need to select the audio ports in the VSTi Setup window. If no

audio port is selected, or no audio device is installed to the computer, an error message appears. Make sure to set the audio ports in the

VSTi Setup window.

When starting the MOXF6/MOXF8 Editor after the installation and controlling the MOXF6/MOXF8

from your computer via the USB cable, the MOXF6/MOXF8 does not operate correctly.

• Did you install the latest driver? ..................................................................................................................... page 4

• Is the USB cable used to connect the MOXF6/MOXF8 to your computer connected correctly?

................................................................................................................................................... MOXF6/MOXF8 Owner’s Manual

• If your computer has automatically activated any power-saving mode (such as suspended, sleep, standby) when

you make the USB connection, the computer may “freeze,” or the driver may stop working. When using the Yamaha

Steinberg USB Driver, disable any power-saving mode on the computer.

• Confirm whether or not a proper USB cable is used.

If the USB cable is broken or damaged, have the USB cable replaced with a known working one.

• Do not use a USB hub for connecting multiple USB devices.

Screen redrawing is slow or stopped.

• Is any other application or device driver running?

Quit the device driver or any unnecessary applications before operating the MOXF6/MOXF8 Editor.

Audio Connection to the Computer (VST version)

Troubleshooting

C.S.G., Digital Musical Instruments Division

308MW-A0