User Manual

4 - Yamaha Marching Toms and Randall May Free Floating Lug Bridge Assembly Instructions

Attach the back rail to the outer drums.

n Locate the bag of bolts, washers and nuts without

the sprocket.

n Insert bolts into the opening channels on both

sides of back rail (images E and F).

• The bolt head should face out of the channel.

• Place the washer on the bolt and loosely tighten

the nut.

n Repeat on the other side (try to insert both sides

of the rail simultaneously so that it’s even).

n Once the rail is in place, tighten using the

⁄16" wrench.

Assembly before back rail. Assembly with back rail. Images show drums

without heads, hoops and tension rods.