Owner`s manual

ROUTINE CHECKS

FRONT BRAKE

The front brake consists of a 260 mm dia-

meter disc brake, which is operated by

means of a double-piston floating clip and

hydraulic pump.

The braking surface should be free from

both grease and dirt to ensure perfect ope-

ration. The following procedure should be

followed if you find it necessary to empty

and the refill the brake fluid circuit.

Remove the pump cover and fill almost com-

pletely with brake fluid.

The loosen the bleeding nit and fit a piece of tubing (for petrol) to this same nnut.

It is recommended that this tube is inserted into some form of container so that there is no spilled fluid.

With the liquid in the pump and the bleeding nut loose, slowly operate the lever until the liquid drops and

exits the tube without any air bubbles. At this point, close the bleeding nut and refill the tank with brake

liquid to the halfway mark. Close the cover and operate until perfect braking is achieved. Check the brake

liquid level through the view-port on the brake pump. Refill if necessary.

Brake liquid level

Manual MRX-SMX 125-ING v4.qxp 24/04/2006 18:17 Página 15