User Manual
Table Of Contents
- Information
- About Yamaha LAN Monitor
- Contents
- Terminology
- Steps to use the software
- Software operating requirements
- Notes
- Notes regarding device detection
- Notes regarding SWX2100/SWR2100P series PoE switch detection
- Notes regarding the power supply interruption function for the Yamaha PoE switch
- Notes regarding a slave with the stack function enabled
- Notes on printing and print preview of the “Whole map”
- Notes regarding detection of Dante-enabled devices
- Notes regarding when using macOS10.15.x or later
- Installing and uninstalling Yamaha LAN Monitor
- Starting and exiting Yamaha LAN Monitor
- Yamaha LAN Monitor screen structure
- Network settings on the computer
- Basic operation
- Menu bar
- Toolbar and display area
- Map screen
- List screen
- Configuring the device
- Update the firmware
- Import/Export the CONFIG
- Troubleshooting
Configuring the device
Yamaha LAN Monitor for Mac User Guide
38
Switch settings
Port settings
Click the [Port settings] tab, and then click a port number to display the following setting items.
Device name
Changes the device name.
Click the [Settings] button to display the “Device name” dialog box.
Label
Allows you to enter a label that distinguishes the individual device.
Click the [Settings] button to display the “Label” dialog box.
Comment
Allows you to enter a comment.
Click the [Settings] button to display the “Comment” dialog box.
Snapshot
Cannot be changed. This is fixed to “On.”
LED mode
Configures the LED mode settings.
Click the [Settings] button to display the “LED mode” dialog box.
EEE
Configures the EEE settings.
Click the [Settings] button to display the “EEE” dialog box.
Flow control
Configures the flow control settings.
Click the [Settings] button to display the “Flow control” dialog box.
Loop detection
Configures the action of the switch when a loop is detected.
Click the [Settings] button to display the “Loop detection” dialog box.
Port mirroring
Configures the port mirroring settings of the switch.
Click the [Settings] button to display the “Port mirroring” dialog box.
QoS
Configures the QoS settings.
Click the [Settings] button to display the “QoS” dialog box.
IGMP Snooping
Configures the IGMP snooping settings.
Click the [Settings] button to display the “IGMP Snooping” dialog box.
Frame counter
reset
Resets the frame counter.
Click the [Execute] button to display a “Frame counter reset” confirmation message.
Firmware Update
Updates the firmware of the switch.
Click the [Execute] button to display the “Firmware Update” dialog box.
CONFIG export
Export the CONFIG of the switch.
Click the [Execute] button to display the “CONFIG export” dialog.
CONFIG import
Import the CONFIG of the switch.
Click the [Execute] button to display the “CONFIG import” dialog.
Restart
Restarts the switch.
Click the [Execute] button to display a “Restart” confirmation message.
Initialize
Initializes the switch.
Click the [Execute] button to display an “Initialize” confirmation message.
Basic functions
Configures the basic functions of the port.
Click the [Settings] button to display the “Basic functions” dialog box.
Tag VLAN
Configures the tag VLAN settings.
Click the arrow ( ) to display the [Settings] button. Click the [Settings] button to display the
“Tag VLAN” dialog box.
PoE power supply
Configures the PoE power supply settings.
This is displayed only for the SWX2110P-8G.
Click the [Settings] button to display the “PoE power supply” dialog box.