User Manual
Table Of Contents
- Information
- About Yamaha LAN Monitor
- Contents
- Terminology
- Steps to use the software
- Software operating requirements
- Notes
- Notes regarding device detection
- Notes regarding SWX2100/SWR2100P series PoE switch detection
- Notes regarding the power supply interruption function for the Yamaha PoE switch
- Notes regarding a slave with the stack function enabled
- Notes on printing and print preview of the “Whole map”
- Notes regarding detection of Dante-enabled devices
- Notes regarding when using macOS10.15.x or later
- Installing and uninstalling Yamaha LAN Monitor
- Starting and exiting Yamaha LAN Monitor
- Yamaha LAN Monitor screen structure
- Network settings on the computer
- Basic operation
- Menu bar
- Toolbar and display area
- Map screen
- List screen
- Configuring the device
- Update the firmware
- Import/Export the CONFIG
- Troubleshooting
Import/Export the CONFIG
Yamaha LAN Monitor for Mac User Guide
47
Import CONFIG on multiple units at once
To import CONFIG on multiple units all at once, follow the steps below.
1. Press the “List” button to open the List screen.
2. Press the “Config Import/Export” tab.
3. Check the checkboxes of the devices for which you want to import the CONFIG.
4. Press the “Config import” button.
5. Select one of the following three methods to specify the CONFIG to be imported.