User Manual
Table Of Contents
- Yamaha LAN Monitor for Mac
- Table of contents
- 1. Introduction
- 2. Installing and uninstalling Yamaha LAN Monitor
- 3. Starting and exiting Yamaha LAN Monitor
- 4. Yamaha LAN Monitor screen structure
- 5. Network settings on the computer
- 6. Basic operation
- 7. Menu bar
- 8. Toolbar and display area
- 9. Map screen
- 10. List screen
- 11. Configuring the device
- 12. Update the firmware
- 13. Import/Export the CONFIG
- 14. Resources
- 15. Troubleshooting
- Yamaha LAN Monitor for Mac
8.3. Screen switching button
This is a toggle button to switch between the Map screen and the List screen.
If the Map screen is displayed, the “Map” button will appear in black.
If the List screen is displayed, the “List” button will appear in black.
8.4. [Device search] button
Opens the “Device search” dialog box. This function can use specified IP addresses to ping devices that
are connected to the current network. This function also can search the IP addresses of all devices
that are connected to the current network.
If the “Connected Devices” view does not list some devices on which you want to perform keepalive
checks (life/ death monitoring), you can execute this function to list the devices in the “Connected
Devices” view.
NOTE
A device that was discovered by the Device search function will disappear from the
“Connected Devices” view if the device does not communicate for a certain period of
time. If you want a discovered device to appear continuously in the “Connected
Devices” view, enable keepalive check on the device. For details on keepalive check,
refer to the description provided for the Keepalive check box in ❷ List for the
“Connected Devices” view.
8. Toolbar and display area
24 | Yamaha LAN Monitor for Mac User Guide