User Manual
◦ MAC Address
Shows the MAC address that is specified for the device.
◦ Serial No.
Shows the serial number of the device.
◦ Version
Shows the firmware version.
◦ Status
Shows the online or offline status.
When updating a device, the progress is shown.
◦ Battery(MTX series and XMV series units only)
Shows the remaining battery capacity of the device.
EMPTY The remaining amount is 0–0.5V. Immediately
stop using the unit, and contact a Yamaha
service center.
LOW The remaining amount is 0.5–2.5V. Contact a
Yamaha service center as soon as possible.
OK The remaining amount is 2.5–3.5V. There is no
problem.
N/A There is no internal battery.
•
[Update Firmware] button
Updates the firmware. Please note that you can do so only for the online devices.
Click this button to open the "Update Firmware" dialog box.
•
[Initialize] button
Initializes the device.
Click this button to open the "Initialize" dialog box.
•
[Reboot] button
Reboots the device.
•
[Close] button
Closes the dialog box.
This cannot be clicked while an update is in progress.
10. Dialog boxes
78 | ProVisionaire Design User Guide