User Manual
Table Of Contents
- Notice regarding data copyright
- Notice regarding the content of this user guide
- Contents
- Chapter 1. An overview of MTX-MRX Editor
- An audio system control network
- Terms used in this user guide
- Data handled by MTX-MRX Editor
- Connection requirements for an MTX/MRX system
- MTX/MRX system configuration examples
- What are YDIF connections? (Cascade mode and Distribution mode)
- What are Dante connections? (Daisy-chain connection and Star connection)
- Patching
- Workflow
- About the screens
- Moving between screens
- Chapter 2. Menu bar and tool buttons
- Chapter 3. Project screen
- Chapter 4. System screen
- Chapter 5. Online and Synchronization
- Chapter 6. Presets
- Chapter 7. Dialog boxes/Software applications
- “Startup” dialog box
- “Network Setup” dialog box
- “Device Information” dialog box
- “Match Device by IP Address” dialog box
- “MTX Configuration” dialog box
- “Dante Information” dialog box
- “Word Clock” dialog box
- “Clock” dialog box
- “Daylight Saving Time” dialog box
- “Scheduler” dialog box
- “Remote Control” dialog box
- “External Events” dialog box
- “Digital Control Panel” dialog box
- “Wireless DCP” dialog box
- “MCP1” dialog box
- “PIN Setup” dialog box
- “Label” dialog box
- “Re-size Image” dialog box
- “PGM1/PGX1” dialog box
- “PGM1 Label Creator” application
- “GPI” dialog box
- “GPI Calibration” dialog box
- “Security Settings” dialog box
- “Project Information” dialog box
- “Configuration Diagram” dialog box
- “Get Log” dialog box
- “Sampling Rate Converter” dialog box
- “Input Source/Redundant” dialog box
- Appendix
Online Chapter 5. Online and Synchronization
MTX-MRX Editor User Guide
141
5. The synchronization progress is displayed.
If you click the [Abort] button, the operation will be halted. This can be a useful way
to save time, for example if you’ve noticed a mistake during synchronization and
want to edit a parameter. The settings will have been partially transmitted, so after
you’ve made changes, be sure to complete synchronization to the end.
• Progress bar
Shows the status of synchronization.
• Message area
Details are shown in this area if you click the [Abort] button to stop the process or if
an error occurs.
• [Abort] button
Click this to stop synchronization.
• [Online] button
When you click this, MTX-MRX Editor will begin synchronizing with the selected
MTX/MRX system.
• [Close] button
Cancels synchronization and closes the dialog box.
This cannot be clicked during synchronization.
6. When synchronization has ended successfully, the progress screen will
close automatically.
Progress bar
Message area