User Manual
Table Of Contents
- Notice regarding data copyright
- Notice regarding the content of this user guide
- Contents
- Chapter 1. An overview of MTX-MRX Editor
- An audio system control network
- Terms used in this user guide
- Data handled by MTX-MRX Editor
- Connection requirements for an MTX/MRX system
- MTX/MRX system configuration examples
- What are YDIF connections? (Cascade mode and Distribution mode)
- What are Dante connections? (Daisy-chain connection and Star connection)
- Patching
- Workflow
- About the screens
- Moving between screens
- Chapter 2. Menu bar and tool buttons
- Chapter 3. Project screen
- Chapter 4. System screen
- Chapter 5. Online and Synchronization
- Chapter 6. Presets
- Chapter 7. Dialog boxes/Software applications
- “Startup” dialog box
- “Network Setup” dialog box
- “Device Information” dialog box
- “Match Device by IP Address” dialog box
- “MTX Configuration” dialog box
- “Dante Information” dialog box
- “Word Clock” dialog box
- “Clock” dialog box
- “Daylight Saving Time” dialog box
- “Scheduler” dialog box
- “Remote Control” dialog box
- “External Events” dialog box
- “Digital Control Panel” dialog box
- “Wireless DCP” dialog box
- “MCP1” dialog box
- “PIN Setup” dialog box
- “Label” dialog box
- “Re-size Image” dialog box
- “PGM1/PGX1” dialog box
- “PGM1 Label Creator” application
- “GPI” dialog box
- “GPI Calibration” dialog box
- “Security Settings” dialog box
- “Project Information” dialog box
- “Configuration Diagram” dialog box
- “Get Log” dialog box
- “Sampling Rate Converter” dialog box
- “Input Source/Redundant” dialog box
- Appendix
“Settings” dialog box Chapter 6. Presets
MTX-MRX Editor User Guide
151
[GPI OUT]
Here you can specify the GPI OUT settings that will be output when the preset is
recalled. You can use GPI OUT output to control a device that’s connected to this unit’s
[GPI OUT] connectors.
• MTX/MRX select buttons
Select the button of the MTX/MRX unit whose settings you want to change. (Each
button shows the UNIT ID and device name.)
This displays the “GPI Out” dialog box.
• [GPI OUT] pin number and status
This shows the pin numbers of the [GPI OUT] connector, and the status that is
specified in the “GPI Out” dialog box.
[SD Song Select & Play]
Here you can specify a file that will be played when the preset is recalled. Each MTX/
MRX unit can play one file or play all files in the same folder in ascending alphabetical
order. If four MTX/MRX units are connected via YDIF, up to four files can be played
simultaneously.
If you want multiple songs to play, open the “SD Play” dialog box, click [Folder/File],
choose [Play all songs in a folder], and specify the folder that contains the songs. If you
frequently need to change the songs that will be played, create an identically-named
folder on another SD memory card, and save each set of songs on its own SD memory
card. This way, you can play back the other songs simply by exchanging SD memory
cards, without having to change settings in MTX-MRX Editor.
• MTX/MRX select buttons
Select the button of the MTX/MRX unit whose settings you want to change. (Each
button shows the UNIT ID and device name.)
The “SD Play” dialog box will appear.
•SONG
This shows the file name or folder name you specified in the “SD Play” dialog box.
MTX/MRX select buttons [GPI OUT] pin number and status
MTX/MRX select buttons