User Manual
Table Of Contents
- Notice regarding data copyright
- Notice regarding the content of this user guide
- Contents
- Chapter 1. An overview of MTX-MRX Editor
- An audio system control network
- Terms used in this user guide
- Data handled by MTX-MRX Editor
- Connection requirements for an MTX/MRX system
- MTX/MRX system configuration examples
- What are YDIF connections? (Cascade mode and Distribution mode)
- What are Dante connections? (Daisy-chain connection and Star connection)
- Patching
- Workflow
- About the screens
- Moving between screens
- Chapter 2. Menu bar and tool buttons
- Chapter 3. Project screen
- Chapter 4. System screen
- Chapter 5. Online and Synchronization
- Chapter 6. Presets
- Chapter 7. Dialog boxes/Software applications
- “Startup” dialog box
- “Network Setup” dialog box
- “Device Information” dialog box
- “Match Device by IP Address” dialog box
- “MTX Configuration” dialog box
- “Dante Information” dialog box
- “Word Clock” dialog box
- “Clock” dialog box
- “Daylight Saving Time” dialog box
- “Scheduler” dialog box
- “Remote Control” dialog box
- “External Events” dialog box
- “Digital Control Panel” dialog box
- “Wireless DCP” dialog box
- “MCP1” dialog box
- “PIN Setup” dialog box
- “Label” dialog box
- “Re-size Image” dialog box
- “PGM1/PGX1” dialog box
- “PGM1 Label Creator” application
- “GPI” dialog box
- “GPI Calibration” dialog box
- “Security Settings” dialog box
- “Project Information” dialog box
- “Configuration Diagram” dialog box
- “Get Log” dialog box
- “Sampling Rate Converter” dialog box
- “Input Source/Redundant” dialog box
- Appendix
“Settings” dialog box Chapter 6. Presets
MTX-MRX Editor User Guide
154
■ “SD Play” dialog box
Here you can specify a file that will be played when the preset is recalled. Each MTX/MRX
unit can play one file or play all files in the same folder. If four MTX/MRX units are
connected via YDIF, each MTX/MRX unit can play one file; i.e., a total of up to four files
can be played by the system.
If you want multiple songs to play, choose [Play all songs in a folder] in the [Folder/File]
area, and specify the folder that contains those songs.
If you frequently need to change the files that will be played, create an identically-named
folder on another SD memory card, and save each set of songs on its own SD memory card.
This way, you can play back the other files simply by exchanging SD memory cards, without
having to change settings in MTX-MRX Editor.
❍ [No Assign] option button
Choose this if you don’t want preset recall operations to change any setting. If a file
was being played by the previous preset, playback will continue.
❍ [Pause] option button
Choose this if you want the currently-playing file to pause.
❍ [Play] option button
A file will play. Make detailed settings below for the file that will be played.
✦Folder/File
• [Play 1 song]/[Play all songs in a folder]
If you choose [Play 1 song], only the file currently selected in [SD CARD:/] will
play.
If you choose [Play all songs in a folder], all files in the folder currently selected
in [SD CARD:/] will play.
Up to 100 audio files will be played in ascending order of their file name.
✦[SD CARD:/]
This shows the name of the file or folder that will be played. You can change the
name, or enter it directly.
You can also enter Japanese.
HINT
NOTE
NOTE