User Manual
Table Of Contents
- Notice regarding data copyright
- Notice regarding the content of this user guide
- Contents
- Chapter 1. An overview of MTX-MRX Editor
- An audio system control network
- Terms used in this user guide
- Data handled by MTX-MRX Editor
- Connection requirements for an MTX/MRX system
- MTX/MRX system configuration examples
- What are YDIF connections? (Cascade mode and Distribution mode)
- What are Dante connections? (Daisy-chain connection and Star connection)
- Patching
- Workflow
- About the screens
- Moving between screens
- Chapter 2. Menu bar and tool buttons
- Chapter 3. Project screen
- Chapter 4. System screen
- Chapter 5. Online and Synchronization
- Chapter 6. Presets
- Chapter 7. Dialog boxes/Software applications
- “Startup” dialog box
- “Network Setup” dialog box
- “Device Information” dialog box
- “Match Device by IP Address” dialog box
- “MTX Configuration” dialog box
- “Dante Information” dialog box
- “Word Clock” dialog box
- “Clock” dialog box
- “Daylight Saving Time” dialog box
- “Scheduler” dialog box
- “Remote Control” dialog box
- “External Events” dialog box
- “Digital Control Panel” dialog box
- “Wireless DCP” dialog box
- “MCP1” dialog box
- “PIN Setup” dialog box
- “Label” dialog box
- “Re-size Image” dialog box
- “PGM1/PGX1” dialog box
- “PGM1 Label Creator” application
- “GPI” dialog box
- “GPI Calibration” dialog box
- “Security Settings” dialog box
- “Project Information” dialog box
- “Configuration Diagram” dialog box
- “Get Log” dialog box
- “Sampling Rate Converter” dialog box
- “Input Source/Redundant” dialog box
- Appendix
Settings for controlling devices across subnets Appendix
MTX-MRX Editor User Guide
267
“Range” shows the IP address setting range.
4 -4. Click the [Apply IP Address] button.
IP addresses are automatically assigned to the virtual devices in the system.
5. Click the [Apply] button.
6. Repeat steps 3 through 5 to assign IP addresses to all virtual devices.
7. When you have finished making settings, click the [OK] button.
Next, use the “IP Address” dialog box to specify IP addresses for the real devices.
When doing so, make settings that match the IP addresses of the virtual devices that were specified
in the “Match Device by IP Address” dialog box.
1. Set the computer’s IP address to “192.168.0.253” and the subnet mask
to “255.255.255.0”.
2. As the device’s settings, set IP SETTINGS to [UNIT ID] or set IP SELECT
MODE / IP Address Mode to [STATIC (IP) (Auto)], set the UNIT ID of all
devices to something other than FD so that none of the devices conflict,
and then power-on the devices.
3. While still offline, click MTX-MRX Editor’s [System] menu item [Device
Information].
The “Device Information” dialog box opens.
4. When all devices are shown in the “Device Information” dialog box,
click the [IP Address] button.
The “IP Address” dialog box opens.