User Manual

Wireless DCP Owner’s Manual
15
3. Configuration
 3.3.3 Entering a PIN
Enter a valid PIN to connect to the selected MTX processor.
1
2
Reset button
Tap to display the Reset PIN screen.
Cancel button
Tap to return to the Select Device
screen without entering a PIN.
Auto-connect switch
Turn this switch on to connect auto-
matically whenever the app is
launched.
 To enter a PIN
1. Enter your PIN using the keyboard.
2. Tap Join to connect to the MTX processor. Upon connection, the Controller 1 pane will be displayed.
NOTE
PINs take the form of a four-digit number, and none are set when the app is first launched. In this condition, it
is possible to log into Wireless DCP without entering a PIN by simply tapping Join. It is important, therefore, to
set PINs. Refer to Section
7.3 Changing PINs for details.